03-29-2002, 04:20 PM | #1 |
Semper Fidelis
Join Date: Dec 2001
Location: Cedar City, Utah
Posts: 654
|
get a load of this!
I was happy as a clam with my "free" low mile 307 and after getting it(long block with parts) from a "friend" I put in a new timing chain seals and gaskets, manifold carb etc. well I thought I would save my back and put in the distributor before I poked it in the engine bay today. WELL-I couldn't get the dist. in the last little bit(I have done this a million times) I think my friend gave me a big block dist. driveshaft, so I will tear it back down and put in the correct one. glad I did this before I gave back the cherry picker or I would have been a basket case.
------------------ 72 C-20 lwb 70 C-10 lwb 69 C-10 lwb 83 Silverado 4X4 Lamar,Missouri Semper Fidelis
__________________
72 Chevy C 20 with 402 For sale 85 GMC K2500 83 Trans Am Cedar City, Utah (Missouri Native) |
03-29-2002, 04:30 PM | #2 |
Open Sundays 10 till 10
Join Date: Nov 2000
Location: Waxahachie,Texas 75165
Posts: 1,009
|
small blocks and big blocks run same distributer.
__________________
817-846-5476 parts for sale always 30 minutes south of Dallas on I35 WWW.BBSAutoSalvage.com bbs1969@direcway.com |
03-29-2002, 04:35 PM | #3 |
Resident Curmudgeon
Join Date: Dec 1999
Location: NH
Posts: 6,662
|
I've had same problem. I just bump the engine a little until it falls into place
------------------ Jeff Jesseman Cheyenne Parts Northeast Franconia, NH 67 Chevy SWB Fleetside 70 GMC Burb 1/2 ton 2wd 72 Chevy Burb 3/4 ton 4x4 Parts bought and sold
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all |
03-29-2002, 04:40 PM | #4 |
Registered User
Join Date: Aug 2001
Location: rock island,il,usa
Posts: 5,382
|
Small blocks & big blocks do run the same dizzy,but the pump drive is different.....If i remember right,by about 1/8". Before you tear it down,you might try slammin the dist in a couple times......the drive shaft may not be seated on the pump.....69 longhorn.
__________________
http://community.webshots.com/user/hotrodhorn |
03-29-2002, 05:59 PM | #5 |
Registered User
Join Date: Jan 2002
Location: Sahuarita, AZ USA
Posts: 2,033
|
We put the HEI from my daughter' wrecked Malibu 267 in my friend's 454 Dump Truck and he's been running it for 8 years. He'll probably be mad if I tell him it won't work after all.
__________________
Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com |
03-29-2002, 07:37 PM | #6 |
"Ochre Ogre"
Join Date: Apr 2000
Location: Springfield, MN
Posts: 3,558
|
They are the same distributer. I told a co-worker that they were the same before he went to the junkyard to get one. When he was there they told him the small block dizzy was $25 and the big blocks were $50. He didn't listen to me and got the $50 one. After that I tried to sell him piston return springs and blinker fluid. Lights are on-nobody was home
Like CPNE said, turn the engine over a touch and it should drop in. If the oil pump rod isn't lined up perfectly it will keep the distributor from dropping in. Get it right and it will drop. ------------------ 1971 C-10 Suburban 1972 C-10 Suburban 1969 XL Galaxie Fastback 1968 Galaxie 500 Fastback 1974 SCOUT II Montrose, Minnesota
__________________
Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087 |
03-30-2002, 01:49 PM | #7 |
Semper Fidelis
Join Date: Dec 2001
Location: Cedar City, Utah
Posts: 654
|
Gentlemen, I have figured it out! My friend didn't give me the pump drive shaft, it was from a bigblock I had a long time ago. I got the correct one and the dist. went right in in a snap!
*Yes bigblock dist will interchange *No oil pump driveshafts will not it has to do with deck height ------------------ 72 C-20 lwb 70 C-10 lwb 69 C-10 lwb 83 Silverado 4X4 Lamar,Missouri Semper Fidelis
__________________
72 Chevy C 20 with 402 For sale 85 GMC K2500 83 Trans Am Cedar City, Utah (Missouri Native) |
03-30-2002, 01:50 PM | #8 |
Semper Fidelis
Join Date: Dec 2001
Location: Cedar City, Utah
Posts: 654
|
ttt
__________________
72 Chevy C 20 with 402 For sale 85 GMC K2500 83 Trans Am Cedar City, Utah (Missouri Native) |
03-30-2002, 04:05 PM | #9 |
Jostrans68
Join Date: Mar 2001
Location: Bloomington indiana
Posts: 1,182
|
to add to the mix they made tall block big block truck engines
------------------ 68 c20 in progress 327 TH400 tach dash Disc Brakes and soon 3.90 rear gears.. have many new parts now just need the time..... Sound Familar Tacoma Wa. The Rain capitol of the USA
__________________
[CGTW Member former 67-72 now with a 96 silverado |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|