Low Beam Relay Not Functioning

[utee05]

All I did was I swapped the wires of the high beams into the other relay that was being used for the low beams just to check if the relay was bad or not. Since everything still functioned this means the relays aren't bad.

I think there may be some loose wiring when I made connections for the low beams so I'll need to check on that.

I do have a multimeter and that was what I was using to verify that the relays were getting power and had a good ground.

How would I check the dimmer switch?

[FLEET72]

Originally Posted by utee05

How would I check the dimmer switch?

Since you know that the high beam works (green wire). Check for 12V at the brown wire after switching to low.