|
07-27-2012, 12:11 PM
|
#1 |
|
56 - autocross
Join Date: Apr 2010
Location: Camarillo, Ca
Posts: 1,121
|
Bed step
Can someone please give me the measurement between the front of the bed step to the cab (1956)? Multiple measurements wold help. Thanks in advance!
|
|
|
|
07-27-2012, 04:08 PM
|
#2 |
|
56 - autocross
Join Date: Apr 2010
Location: Camarillo, Ca
Posts: 1,121
|
Re: Bed step
Anyone? Help?
|
|
|
|
|
07-27-2012, 06:15 PM
|
#3 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,720
|
Re: Bed step
Even on both sides with the gap between the bed and the back of the cab even all the way up and down. That will probably be better than when it left the factory new.
Cab mounts in good shape and the correct bed mounts in good shape help too. |
|
|
|
|
07-27-2012, 06:23 PM
|
#4 |
|
56 - autocross
Join Date: Apr 2010
Location: Camarillo, Ca
Posts: 1,121
|
Re: Bed step
Thanks for the response. I need the measurement in the form like 2 inches.
|
|
|
|
|
07-27-2012, 08:49 PM
|
#5 |
|
Registered User
Join Date: Nov 2011
Location: Langley, BC
Posts: 702
|
Re: Bed step
I measured mine before I disassembled it and mine was 1.25 inches at the upper lip where you have referenced. Having said that, I'm betting they vary somewhat between trucks. BTW mine is a 56 also. Hope this helps.
|
|
|
|
|
07-27-2012, 09:09 PM
|
#6 |
|
Registered User
Join Date: May 2010
Location: Lawrenceville, Ga
Posts: 2,648
|
Re: Bed step
It's hard to get an exact measurement due to the curvature of the lower cab and the front of the step, but mine measures 1 3/4 inches.
|
|
|
|
|
07-27-2012, 09:40 PM
|
#7 |
|
56 - autocross
Join Date: Apr 2010
Location: Camarillo, Ca
Posts: 1,121
|
Re: Bed step
Thanks everyone for your help.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
