![]() |
![]() |
#1 |
Registered User
Join Date: Dec 2010
Location: Bayville NJ
Posts: 385
|
Heater core install
Is there any particular reason why it would NOT be a good idea to install the core upside down in the housing so as not to have to criss criss the hoses? Another words, why can't the bottom hose go to the water pump and the top hose go to the intake manifold as long as you flip the core?
Posted via Mobile Device
__________________
Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Apr 2010
Location: Buford, Ga
Posts: 205
|
Re: Heater core install
In my case, the hoses were different sizes.
__________________
In my opinion, it works best to have the seat out so you have room to flop your body around while standing on your head. -ashx2 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Dec 2010
Location: Bayville NJ
Posts: 385
|
Re: Heater core install
Yes, mine as well but as long as I use thw correct size hose on the correct side of the core and that hose goes to where it's supposed to does it matter if the core is installed upside down is the real question.
Posted via Mobile Device
__________________
Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: Heater core install
My understanding is it prevents forming an air pocket inside the core.
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
![]() |
![]() |
![]() |
#5 |
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: Heater core install
I did and it seems to work fine.I like the cleaner look of it this way.I live in a fairly mild climate tho.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Feb 2010
Location: Kennesaw, GA
Posts: 288
|
Re: Heater core install
Yes from what I can understand, the core is setup to feed from the bottom, and exit from the top.. this keeps more water in the core for a better heat exchange (warmer air in the heater). You may or may not even notice the difference if your coolant system is full.
Try it out and see how you like it. Shawn |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|