AL 2 15x8 and 2 15x9 6 lug wheels

[lolife99]

Originally Posted by Malamute

Would these work with cpp front/rear disk brakes? If so and Special K passes I'll take them for $200 shipped.

Originally Posted by mrdana60

Have no idea on that maybe could chime in. They where on a 69 with drums.

Originally Posted by Malamute

Thanks, can I cross post this to the 67-72 main board? I don't want to break any rules. I'm pretty sure they will work but I'm not sure on the backspacing.

Originally Posted by mrdana60

Some of these guys can help. I m sure someone will chime in

Originally Posted by Malamute

Trying to find out if they will work with my setup. I'd hate to buy them and have them not work. I put a post up on the main board, I'll see if I can get an answer soon. Thanks.

Malamute,... which wheels are you buying?
Just 2 or all 4?
Is your truck lowered or stock height?
What year truck?
What year rearend?
(this will make the rearend widths different, depending on the year)

The 8" ralley style wheel will definitely work with a disc brake rotor or rear disc brake conversion.

The other 9" wheels I don't know.
If you look closely,... the centers of the two black 9" wheels are different.
The wheel on the left has the "4-nub" 71-87 style center.
The wheel on the right has the older, 3-nub style center.
I assume you would use the 9" wheels on rear?
These will definitely work a drum brake rearend,... just don't know about the caliper clearances of these rare 9" rims.

Maybe some pics of the back side of the black wheels would help.

[mrdana60]

i will get whatever pics needed but the rear RARE 9 wide was on a drum brake rear and step side with no trouble fitting. the fronts i would assume work. just let me know what you need pics of and i will get them.

[Malamute]

Thanks for the response lolife. Right now the truck is stock suspension, brakes and rear end. '69 C10 that came with a 350 but has a sb 400 now. I just picked up cpp disk brakes front/rear, they just came yesterday. The plan is 4/6 drop w/ 2.5" drop spindles up front. I currently have ralley's on it but want to go with a steel wheel and dog dish caps when it's all done. Hope that helps. I just don't want to buy these and then have them not work, I appreciate your response.

[Malamute]

Also, all 4 wheels with the 8's up front and 9's in the rear.

[lolife99]

Originally Posted by Malamute

Also, all 4 wheels with the 8's up front and 9's in the rear.

Not trying to diss this sale but those 8's up front are going to be hard to tuck with a 4" drop.
6-lug 15x8's (all that I have ever measured) have a 3-5/8" BS which is less than the 5-lug 15x8 wheels. (4" BS)

The 9's on a fleetside bed, "should" work,... but I don't know about the disc brake caliper clearance.

[Malamute]

mrdana, I'm going to pass. I think the proper sequence is for me to get the brakes and suspension done first and then go from there. I can run my ralley's until I get there. Sorry to hold you up!

[mrdana60]

its ok. hate for them not to fit.

[mrdana60]

Originally Posted by 1971sierragrande

Could you check shipping to 74014? thanks

your up if your interested in them will do 200 shipped

[Malamute]

Me too, GL with the sale. Thanks for the input lolife, that was helpful.

[mrdana60]

8s. Sold. The nine wide is still available 100.00 shipped onthem

[uncle]

Please send pics of front rear and inside of wheels to my phone. 678/249-5414
Posted via Mobile Device

[mrdana60]

I don't have enough cell service in the sticks to send pics lol. But can upload on here later.

[uncle]

That's fine
Posted via Mobile Device

[uncle]

Any luck with pics?
Posted via Mobile Device

[mrdana60]

Got one cleaned up and forgot pic. Will snap some for you today.

[Fishbone]

I will buy the 9in wheels. How much If I pick them up? I live in Talladega please give me a call if you still have them 256-223-2612

[uncle]

9 inch wheels sold?
Posted via Mobile Device

[mrdana60]

all wheels sold