|
09-04-2012, 10:45 PM
|
#1 |
|
Registered User
Join Date: Jul 2012
Location: OMAHA, NE
Posts: 47
|
Power Window Help
Okay long story short I have a 84 k10 with power windows. The master power window switch fell apart on me. I attempted to put it back together, it worked long enough for me to get the window up and then it started to smoke from the switch. I must not have put it back together right. So I bought a new switch and now none of the power windows work from the master switch or the passenger switch. I looked but didn't see any fuses for the power windows. Is there a fuse or relay I could have burnt up?
|
|
|
|
09-04-2012, 11:58 PM
|
#2 |
|
Registered User
Join Date: Jan 2011
Location: Port Coquitlam, BC
Posts: 202
|
Re: Power Window Help
check the pigtail connector on the back of the switch to make sure that the wires didn't melt when the switch blew up. Also, get a multimeter or test light to see if you still have power to the switch
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
