![]() |
![]() |
#1 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Project "Sweet 16"
This is a joint project my 14yr old son and I are undertaking for his 16th Birthday. The truck is a 47 3600 5 window Chevrolet, purchased by me when I was 14. I found it pretty cool that he chose my first truck to become his first truck.
After lots of research on this board, Michael decided that he wanted to go with an S10 frame, 350/700R4 combo and leave the body in it's original farm truck glory. This will be a extremely tight budget build. There are no "barter deals" with go fast parts I happen to have lying around. Everything will be paid cash, and as Low buck as I can make it. Goal for this build is 3-4 Thousand to "finished" truck.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
First project was to find a suitable frame and running gear. Struck a deal with a local shop for a 2wd, short cab, long bed 91 S10 that already had a 4x4 rear axle installed. The deal was that Michael and I strip the complete truck, and give the owner $150 for complete frame/suspension. The owner included the booster and master cylinder with the deal, as well as a few other needed parts.
We spent about a day and a half removing front sheet metal, box, cab, and motor/trans. And hauled it home.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
Scored a SWEET deal on Craigslist yesterday on a full set of 17x8 Torque thrust II's with tires for $325. The rear tires are too small for our project, but I can replace them later with the 295/40R 17s He wants.
Also have a line on an 18,000 mile GM Goodrench Re-man 350 for $200 and a 55,000mi 700R4 for another $150. (both from a trusted source). So far total investment is $475 for chassis and wheels/tires, with another anticipated $350 for engine/trans. We're looking pretty good on our $4000 budget! First pic is Michael installing his new wheels, second is the chassis on the Torque thrusts.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
Next step is to secure the engine/trans, then go get the truck. (47 is in storage in Central Iowa). I wanted to get the important pieces together before I filled my garage with it!
Plans for engine are simple. No hi-po stuff, 16yr old doesn't need it... Stock motor with a 262/272 cam (for a little lope), some dress up stuff, and maybe block huggers, or S10 conversion headers. Clean it, re-seal it, paint it up, and run it. Everything is going to be done right in our garage, spending extra time to save $$$. We should have the driveline by the end of next week, to start cleaning it up. Enjoy!
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2011
Location: Valparaiso, NE
Posts: 93
|
Re: Project "Sweet 16"
Sounds like a great project! I'm looking forward to your updates
-Jeff |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
Thanks Jeff, I know it isn't anything new or cutting edge, but it's his first build so we thought it appropriate to do a thread.
I didn't mention it earlier, but the reason for the tight budget is because he is responsible for half of the cost. I wanted him to have his own money invested in it. Might make him think twice before cracking that beer before driving home someday... ![]()
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
|
Re: Project "Sweet 16"
Looking good so far you are off to a great start.
![]() |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2011
Location: Valparaiso, NE
Posts: 93
|
Re: Project "Sweet 16"
It's important to him, I'm sure. There will be a lot of great lessons and bonding.
I always wanted to do a car (or truck) with my Dad. We looked into a few projects, but never found "the one." I'm 36, and STILL long to get him involved in my build. I just think it's an awesome Father/Son thing to do. Good for you! |
![]() |
![]() |
![]() |
#9 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
Yeah, I've never really built one with my dad either. I'm 35, and still hoping to get to it one day. With being military, I move around a lot and am never very close to home. I did however build a 64 Riviera for him about 10 years back.
at 14, it's a matter of keeping him motivated. This is a pretty big project for a youngster. easy to get discouraged. ![]()
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
|
Re: Project "Sweet 16"
Cool project, not many people have the opportunity you have to build something with your son, especially something with soo much sentimental value.
My rule of thumb is always double your time and projected cost. For me though, I'm def thrifty, but somethings I can't let slide. It's crazy how much of the little things add up. How about some pics of your truck? are you going to coat the frame? My suggestion, def do it while you have it stripped. Good luck and have fun.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com |
![]() |
![]() |
![]() |
#11 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
No pics of the truck yet. need to go get it from storage in the next 3 weeks or so.
I'm pretty good at being realistic about time/money invested. Here is a pic of my last Chevy project. Car was a free running basketcase when I got it. Total investment to where it is today was $3000. I did my own paint, interior, engine work, and top. Car is reliable and clean, turns lots of heads. On the chassis. Yes, we are planning on cleaning it up and painting it after all the body mounts, motor mounts, etc. are located and welded.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: May 2010
Location: Lawrenceville, Ga
Posts: 2,645
|
Re: Project "Sweet 16"
Skyman, doing a restoration project with a teenage son is a huge mistake. I made that mistake when my son was fifteen. I bought him a 69 Road Runner that was a theft recovery and we restored it together, finished it just when he got his license. He loved that car, but I turned my own son into a complete CAR GUY!!! He's even been accused of being a MOTOR HEAD.. Now he's as miserable as the rest of us, always working on some restoration, always wanting something else just as we finish our current project, always needing just a little more money than we have. It never ends. Now he owns a body shop and has a 69 GTO, a 70 Camaro, and a 72 TransAm under construction, and a 68 GTO convertible waiting to be restored. It's a sickness being a car guy, see what you are setting your son up for, LOL
Only kiddig of course. Restoring that 69 Road Runner was a great time for him and me and he still talks about it. My youngest son was a Moto-Cross racer and wanted a truck so he and I restored a 69 Chevy C/10 together. Those were good times. You will enjoy the time together. Good luck with the restoration, It's too bad that more young boys don't have an opportunity like that. |
![]() |
![]() |
![]() |
#13 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
Russell,
![]() Such a sad Story. I could only hope my kids would be that into cars... LoL
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
#14 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
Progress report.
We have cleaned up the under cab area of the frame and cut off the S10 cab mounts, in prepartaion for body mount brackets. Today my son and I picked up the engine/trans combo. Didn't get a 700R4 as planned, but such a sweet deal on a turbo 350 that we sacrificed it in order to get the truck going. Engine is mounted in the S10 location right now. Once we mount the body, we'll decide how far back to move it. Looks like we'll be making the drive to Iowa next weekend to pick up the truck. Will post pics of it when it gets home. First photo is Michael grinding the remnants of the cab mounts on the frame. Second it the new powerplant mounted in the frame.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
#15 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
Almost forgot..
Engine/Trans cost us $350. I spent $40 on new motor mounts today, So that puts our total cost at $1045 to date. We still need to get a harness, exhaust, Radiator, interior stuff, and miscelanious... but the budget is lookin pretty good. ![]()
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
|
Re: Project "Sweet 16"
I love it when a plan comes together! lookin good!
|
![]() |
![]() |
![]() |
#17 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
Well, went to Iowa and picked up the truck this weekend. Here's some before pics. Very solid truck, couple dents in the front fenders, but I think I can massage those out without damaging the old paint too much. The side windows are both shot out, but I pulled the drivers windshield (gasket was falling apart) so we wouldn't lose it on the road. Really no rust to speak of, been off highway since 1977, stored indoors since 1992 when I bought it.
Oh, and it has AWESOME Patina....
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 Last edited by skymangs; 09-17-2012 at 01:12 AM. |
![]() |
![]() |
![]() |
#18 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
Here's a shot of the odometer... Not sure, but in my experience the numbers are always mis-aligned once it rolls over. These look very straight.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
#19 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
So we got home about 5pm, unloaded it in the garage and got to work. Tonight we got the front end apart, seat out, doors off, etc. Heres a couple pics. Fenders and core support are now off, didn't take another pic though (too late) hoping to get the cab of tomorrow or tuesday to mock up on the S10 chassis. So far I haven't found any rust in the cowl or behind the front fenders. Just one carrage bolt and sqaure nut inside the fender (Farmers fix I'm sure) Will be a PITA, since I'll have to cut it off. We've broken about 6 or 8 bolts (fenders to cab, pretty standard), but it's coming apart nicely. I did find a little rust in one cab corner. I'll take a pic tomorrow.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
#20 |
Registered User
![]() Join Date: May 2011
Location: Murrieta, Ca
Posts: 70
|
Re: Project "Sweet 16"
What's your plans for a truck bed?
Posted via Mobile Device
__________________
55 gmc longbed stepside project http://67-72chevytrucks.com/vboard/s...28#post4708828 |
![]() |
![]() |
![]() |
#21 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
Pretty soon we're gonna have to start looking for a quasi matching faded red box... not looking forward to that search. I did see one in Omaha that may fill the bill though.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Mar 2008
Location: Cali.
Posts: 958
|
Re: Project "Sweet 16"
Awesome build. I wish you both the best of luck.
__________________
My build, 53 GMC / S10 swap http://67-72chevytrucks.com/vboard/s...d.php?t=305723 My build, 59 Chevy / 88 fullsize swap http://67-72chevytrucks.com/vboard/s...hlight=sgtusmc U.S. Marines - Certified Counselors to the 72 Virgins Dating Club. |
![]() |
![]() |
![]() |
#23 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
So, today the cab came off, and was pre-positioned on the S10 frame. Here's some Pics of Michael hard at work...
![]()
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
#24 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
If anyone in the Central US has need for a 3/4 ton chevy chassis, complete with running 250 six cylinder and granny 4 speed please let me know. I listed on Craigslist, I don't want it go to the scrapyard, seems a waste.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
#25 |
Registered User
![]() Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Project "Sweet 16"
got the cab on the S10 chassis, blocked up at what I think is the correct height. 3.5 inches off the frame, plus 3/4" for the S10 body mount in the rear, and 4.25" plus 3/4" for S10 body mount in the front. Had to trim a little for the trans.
We hung the fenders to make sure the wheels are centered in the openings, and fiddled with fitment for about 2 hours. I think we have the front wheels looking pretty good in the openings, any thoughts?
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|