square headlights!!!?!??!?! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dinnut · 10-13-2003, 06:41 PM

nice truck except for the FRONT. WHICH IS EXTREMELY FUGLY!
those wheels look good on there imo.

72shadetree · 10-13-2003, 06:53 PM

lose the square headlights and put some grille trim on it

1969 GMC · 10-13-2003, 06:53 PM

headlights =

louvered cab corners = ?
taillights = ? (69-75 ihc travelall?)
wheels =

Adam12 · 10-13-2003, 06:59 PM

I second that 1969 GMC with this addition

Louvered tailgate =

dinnut · 10-13-2003, 08:06 PM

i didnt even notice the louvered cab corners. wtf is this guy smoking? square headlights? notice where the turn signals should go? he left the holes??? that front is fugly and the hood isnt fitted right

highboy_04 · 10-13-2003, 09:05 PM

he didnt leave holes where the turn signals used to go. the turn signals are blacked out, they are still there.

Longhorn Man · 10-13-2003, 11:13 PM

My cab corners are louvered too...well, a real slopy louver anyways.
And it is only one per corner too.

dinnut · 10-13-2003, 11:21 PM

real smooth longhorn man. real smooth

Longhorn Man · 10-14-2003, 12:04 AM

heh heh heh...you may call it rust, but that just means I have a better imagination than you do.

As for the truck pictured up there, it is uglier than a man's @ss.

1969 GMC · 10-14-2003, 12:14 AM

ok, now that just wasn't called for

ZOOMY · 10-14-2003, 02:47 AM

Can anyone confirm the taillights ? Thanks.....Zoomy

VTKidder · 10-14-2003, 08:03 AM

Administrator,

Please remove 100 posts from Longhorn Man's total for the previous picture posted.

==========

The worst thing about that truck is that it's at a SHOW! I wish there was a closeup pic of the headlight, so you could see the rad. support and headlight holding hardware in the huge gaps where a bezel should be.

I understand why the owner did that though; 67-72 headlights and trim are VERY rare, and even more expensive.

I'd have thrown S-10 headlights too.

Way to completely ruin a cool truck.

Boz-all would be proud of this.

cheatham · 10-14-2003, 08:28 AM

Geez! First thread I click on this morning and look what I get. First the headlights, then that. Thanks longhorn man, I'll be back to the board after I wake up some more- I'm scared to know what's next.

70short · 10-14-2003, 10:07 AM

Chopped CAB ?????????

landon4421 · 10-14-2003, 11:26 AM

lewi · 10-14-2003, 11:48 AM

that's digusting, and I must say the truck is just a bit different but the other picture is not what I needed this AM.

10-13-2003, 06:41 PM	#1
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	square headlights!!!?!??!?! nice truck except for the FRONT. WHICH IS EXTREMELY FUGLY! those wheels look good on there imo. __________________ 70 longbed 496/th400/Ford 9"

10-13-2003, 06:53 PM	#2
72shadetree KEEP ON TRUCKING Join Date: Sep 2000 Location: martinsville va Posts: 2,563	lose the square headlights and put some grille trim on it __________________ 72 cheyenne 2wd lwb 71 k20 sons bassett va

10-13-2003, 06:53 PM	#3
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	headlights = louvered cab corners = ? taillights = ? (69-75 ihc travelall?) wheels = __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

10-13-2003, 06:59 PM	#4
Adam12 I hate trannys Join Date: Dec 2001 Location: Bakersfield,CA Posts: 160	I second that 1969 GMC with this addition Louvered tailgate = __________________ 70 SWB 481 ci, TH-400, Edlebrok Victor Jr. intake, Holley street avenger 770, Dynomax ceramic coated headers. Dual flowmasters. and only 3516134 more little things to do.

10-13-2003, 08:06 PM	#5
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	i didnt even notice the louvered cab corners. wtf is this guy smoking? square headlights? notice where the turn signals should go? he left the holes??? that front is fugly and the hood isnt fitted right __________________ 70 longbed 496/th400/Ford 9"

10-13-2003, 09:05 PM	#6
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	he didnt leave holes where the turn signals used to go. the turn signals are blacked out, they are still there. __________________ '67 c10 350/th350

10-13-2003, 11:13 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	My cab corners are louvered too...well, a real slopy louver anyways. And it is only one per corner too.

10-13-2003, 11:21 PM	#8
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	real smooth longhorn man. real smooth __________________ 70 longbed 496/th400/Ford 9"

10-14-2003, 12:04 AM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	heh heh heh...you may call it rust, but that just means I have a better imagination than you do. As for the truck pictured up there, it is uglier than a man's @ss.

10-14-2003, 12:14 AM	#10
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	ok, now that just wasn't called for __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

10-14-2003, 02:47 AM	#11
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	TAILLIGHTS Can anyone confirm the taillights ? Thanks.....Zoomy

10-14-2003, 08:03 AM	#12
VTKidder Registered User Join Date: May 2003 Location: Vermont Posts: 996	Administrator, Please remove 100 posts from Longhorn Man's total for the previous picture posted. ========== The worst thing about that truck is that it's at a SHOW! I wish there was a closeup pic of the headlight, so you could see the rad. support and headlight holding hardware in the huge gaps where a bezel should be. I understand why the owner did that though; 67-72 headlights and trim are VERY rare, and even more expensive. I'd have thrown S-10 headlights too. Way to completely ruin a cool truck. Boz-all would be proud of this.

10-14-2003, 08:28 AM	#13
cheatham I need a brake! Join Date: Jul 2002 Location: Nashville, TN Posts: 474	Geez! First thread I click on this morning and look what I get. First the headlights, then that. Thanks longhorn man, I'll be back to the board after I wake up some more- I'm scared to know what's next. __________________ JP MEMBER OF THE DISCS UP FRONT CLUB 1971 Chevy C10

10-14-2003, 10:07 AM	#14
70short Registered User Join Date: Sep 2003 Location: Boise ID Posts: 609	Chopped CAB ????????? __________________ "72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES"

10-14-2003, 11:26 AM	#15
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	__________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"



Register or Log In To remove these advertisements.

10-14-2003, 11:48 AM	#16
lewi Registered User Join Date: Nov 2002 Location: Redding California Posts: 223	that's digusting, and I must say the truck is just a bit different but the other picture is not what I needed this AM. __________________ 1971 Chevy Cheyenne 383/350 LWB 2wd Built to use, and look good.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.