TN 4x4 spring hangers front/rear NEEDED - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1968vetL-71 · 04-15-2011, 08:45 PM

Hey all. I'm looking for some spring hangers for a 4wd conversion. Need front assy and rear hangers also. The front-rear hangers need to be the long drop like a blazer, not 2wd. Let me know what you have. Do you have a parts frame or ? May be interested in complete frame if location is close. Thanks in advance!!

Livrat · 04-15-2011, 09:48 PM

I have everything you need, Front spring core supports/hangers, front spring rear mounts with shackles, long rear spring front hangers, and rear hangers, All off of a 72 Blazer. $150.00 shipped

1968vetL-71 · 04-16-2011, 10:10 AM

Thanks Livrat, i will definately keep this as an option. I'd like to find something alittle closer and save a little money too boot. I had to pass on a complete 72 blazer frame on the way back from Nebraska for 100 cause I couldn't get it on my trailer. ( too full of parts ) If I don't find anything closer I will give you a shout. Thanks again.

Were the parts taken off carefully? any torch marks or rust ?

Matthew

Livrat · 04-16-2011, 11:24 AM

Matthew,
No worries, I understand wanting to find some closer and saving some $$,
All were taken off as carefully as possible by "washing" the rivit heads off with a torch. most do have surface rust but nothing severe,
I have many sets so I am sure I could come up with a nice set.

1968vetL-71 · 04-26-2011, 05:39 PM

I've got all the 4x4 spring hangers and brackets ( front and rear ) coming this way! Thanks Livrat!!!!!!!

1968vetL-71 · 04-30-2011, 09:28 PM

Everything came in and looks fantastic!! Thanks again Livrat!! Now its time to measure, measure, measure!

Livrat · 05-01-2011, 12:04 AM

Your welcome, Glad to hear they arrived safely

cube · 10-24-2012, 03:20 AM

do you have any more hanger brackets? or short bed 4x4 frame?

Livrat · 10-24-2012, 10:24 AM

Sorry to say.. I do not have any more of those brackets or a short bed frame

04-15-2011, 08:45 PM	#1
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	4x4 spring hangers front/rear NEEDED Hey all. I'm looking for some spring hangers for a 4wd conversion. Need front assy and rear hangers also. The front-rear hangers need to be the long drop like a blazer, not 2wd. Let me know what you have. Do you have a parts frame or ? May be interested in complete frame if location is close. Thanks in advance!! __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

04-15-2011, 09:48 PM	#2
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 4x4 spring hangers front/rear NEEDED I have everything you need, Front spring core supports/hangers, front spring rear mounts with shackles, long rear spring front hangers, and rear hangers, All off of a 72 Blazer. $150.00 shipped

04-16-2011, 10:10 AM	#3
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: 4x4 spring hangers front/rear NEEDED Thanks Livrat, i will definately keep this as an option. I'd like to find something alittle closer and save a little money too boot. I had to pass on a complete 72 blazer frame on the way back from Nebraska for 100 cause I couldn't get it on my trailer. ( too full of parts ) If I don't find anything closer I will give you a shout. Thanks again. Were the parts taken off carefully? any torch marks or rust ? Matthew __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

04-16-2011, 11:24 AM	#4
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 4x4 spring hangers front/rear NEEDED Matthew, No worries, I understand wanting to find some closer and saving some $$, All were taken off as carefully as possible by "washing" the rivit heads off with a torch. most do have surface rust but nothing severe, I have many sets so I am sure I could come up with a nice set.

04-26-2011, 05:39 PM	#5
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: 4x4 spring hangers front/rear NEEDED I've got all the 4x4 spring hangers and brackets ( front and rear ) coming this way! Thanks Livrat!!!!!!! __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

04-30-2011, 09:28 PM	#6
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: 4x4 spring hangers front/rear NEEDED Everything came in and looks fantastic!! Thanks again Livrat!! Now its time to measure, measure, measure! __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

05-01-2011, 12:04 AM	#7
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 4x4 spring hangers front/rear NEEDED Your welcome, Glad to hear they arrived safely

10-24-2012, 03:20 AM	#8
cube Registered User Join Date: Oct 2012 Location: sumrall,ms Posts: 19	Re: 4x4 spring hangers front/rear NEEDED do you have any more hanger brackets? or short bed 4x4 frame?

10-24-2012, 10:24 AM	#9
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 4x4 spring hangers front/rear NEEDED Sorry to say.. I do not have any more of those brackets or a short bed frame

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.