1966 Camper Special Build - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

captkell · 10-12-2012, 01:22 PM

I did get the Alt on and will have the engine buttoned up soon with pics. I have taken out the passenger side floor pan and will get the drivers side out and have both of those replaced soon with pics of course. I am thinking of using a undercoating on the frame instead of the most often used powder coatings. Does anyone see a problem with this? Any suggestions would be most welcomed.

captkell · 10-12-2012, 01:25 PM

I did get the Alt on and will have the engine buttoned up soon with pics. I have taken out the passenger side floor pan and will get the drivers side out and have both of those replaced soon with pics of course. I am thinking of using a undercoating on the frame instead of the most often used powder coatings. Does anyone see a problem with this? Any suggestions would be most welcomed.

McMurphy · 10-12-2012, 11:15 PM

I have read a lot of these builds, and seen people do some awesome stuff with bedliner/under coating but I dont think I have seen anyone do a frame in it yet...
You may be off into uncharted waters with this idea.

captkell · 10-17-2012, 07:57 PM

OK SO I have been away for a bit but for good reason, Welcome the newest member to the family, BJ. BJ is a 59 3200.
The Valve covers for the other project will be here tomorrow I hope. I think Summit had to make these due to the time it took them to get them out the door....Since BJ has a 6 in her I'm thinking some form of 8 would bring her up to speed. Not decided yet to put the current one in or order a trun key crate. Hmmm the choices.

captkell · 10-19-2012, 09:43 AM

Just about ready to go rent the sand blaster and walnut the frame and soda the body. Waiting for some free time so I can get to that then get the front clip painted and back together, Then some new hoses and I'll be ready to put the motor back in. Then the floor pans and drivers rocker, and offf to paint. I know there is more than that, I must be leaving something out.

captkell · 10-29-2012, 11:01 AM

Nothing but rain here so I have not been able to do much. I am going to put up a small shelter so that I can get some work done. The 1959 didn't last long a friend of mine wanted it so I traded for his Harley a FLHTC ELECTRA GLD. Now my wife says I have to increase my life insurance policy but if I leave enough toys behind then it should all be good

Right?

10-12-2012, 01:22 PM	#26
captkell Registered User Join Date: Oct 2012 Location: Kirkland WA Posts: 28	Re: 1966 Camper Special Build I did get the Alt on and will have the engine buttoned up soon with pics. I have taken out the passenger side floor pan and will get the drivers side out and have both of those replaced soon with pics of course. I am thinking of using a undercoating on the frame instead of the most often used powder coatings. Does anyone see a problem with this? Any suggestions would be most welcomed.

10-12-2012, 01:25 PM	#27
captkell Registered User Join Date: Oct 2012 Location: Kirkland WA Posts: 28	Re: 1966 Camper Special Build I did get the Alt on and will have the engine buttoned up soon with pics. I have taken out the passenger side floor pan and will get the drivers side out and have both of those replaced soon with pics of course. I am thinking of using a undercoating on the frame instead of the most often used powder coatings. Does anyone see a problem with this? Any suggestions would be most welcomed.

10-12-2012, 11:15 PM	#28
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	Re: 1966 Camper Special Build I have read a lot of these builds, and seen people do some awesome stuff with bedliner/under coating but I dont think I have seen anyone do a frame in it yet... You may be off into uncharted waters with this idea. __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1

10-17-2012, 07:57 PM	#29
captkell Registered User Join Date: Oct 2012 Location: Kirkland WA Posts: 28	Re: 1966 Camper Special Build OK SO I have been away for a bit but for good reason, Welcome the newest member to the family, BJ. BJ is a 59 3200. The Valve covers for the other project will be here tomorrow I hope. I think Summit had to make these due to the time it took them to get them out the door....Since BJ has a 6 in her I'm thinking some form of 8 would bring her up to speed. Not decided yet to put the current one in or order a trun key crate. Hmmm the choices. Attached Images

10-19-2012, 09:43 AM	#30
captkell Registered User Join Date: Oct 2012 Location: Kirkland WA Posts: 28	Re: 1966 Camper Special Build Just about ready to go rent the sand blaster and walnut the frame and soda the body. Waiting for some free time so I can get to that then get the front clip painted and back together, Then some new hoses and I'll be ready to put the motor back in. Then the floor pans and drivers rocker, and offf to paint. I know there is more than that, I must be leaving something out. Attached Images

10-29-2012, 11:01 AM	#31
captkell Registered User Join Date: Oct 2012 Location: Kirkland WA Posts: 28	Re: 1966 Camper Special Build Nothing but rain here so I have not been able to do much. I am going to put up a small shelter so that I can get some work done. The 1959 didn't last long a friend of mine wanted it so I traded for his Harley a FLHTC ELECTRA GLD. Now my wife says I have to increase my life insurance policy but if I leave enough toys behind then it should all be good Right?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.