Parting out 68 SWB truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 10-20-2003, 05:52 PM

See pictures.

Cab $250 decent, needs rockers, cab corners are solid. Non AC. I'll be keeping some small parts from inside the cab.

Chassis $400 sticker says 3.73 posi, but I jacked it up and it seems non posi. Complete rolling. I removed the steering box, tranny crossmember, and front coil springs. I'll throw in a set of springs though, if you buy it. Rascal is straight!

Doors $50 each left one is kind of crappy. Right one is better, no rust showing through on bottom

Bed $200 it's pretty much a turd. Steel floor with gate. I'd say it's a 3 or 4 on a 1-10 (by Texas standards).

This truck was bought in Texas (still has dealer plate on tailgate) and used at my local airport for work truck. I'm in DFW area. We don't get rust here like some places. I'm a decent welder, and I could have the rockers on and all repair done in 4-5 hrs. Does not need floors. Have no title to this truck.

Tx Firefighter · 10-20-2003, 05:56 PM

pic 2 - Left rocker

Tx Firefighter · 10-20-2003, 05:58 PM

Bryan68custom · 10-20-2003, 06:20 PM

Does it have the e-brake cover on it ????

Tx Firefighter · 10-20-2003, 06:22 PM

show me what one looks like. There are boxes and boxes of parts to look through.

Bryan68custom · 10-20-2003, 06:25 PM

I dont have a pic there was some on the message board a while back I'll see if Ican find it.

Tx Firefighter · 10-20-2003, 07:27 PM

Quote:

Originally posted by Bryan68custom
I dont have a pic there was some on the message board a while back I'll see if Ican find it.

Bryan, I saw the pictures, that's a big negative on the cover.

67swbc10 · 10-20-2003, 07:47 PM

Can I get more info on the bed and pics of rust or dents.
Thanks Mario

Tx Firefighter · 10-20-2003, 07:58 PM

Mario, this is the only other picture I have right now. It will be tomorrow or the next day when I can take another.

**CPNE** · 10-20-2003, 09:16 PM

What type of drivetrain was in it? If factory smallblock/th350 combo, I need a drive shaft.

Thanks

Tx Firefighter · 10-20-2003, 09:21 PM

This truck was a little hot rod. The glove box door says 327 V8, auto tranny, and 3.73 posi trac rearend......but, the driveshaft is long gone. Sorry

**PICKMUP** · 10-20-2003, 10:03 PM

We'd call that a "Rust Free" truck, up here.

Tx Firefighter · 10-21-2003, 10:04 PM

.

Tx Firefighter · 10-21-2003, 10:11 PM

The arrow is pointing to a dent.

Tx Firefighter · 10-21-2003, 10:12 PM

.

slim shaney · 10-21-2003, 10:14 PM

how good is the pass side rear fender and bed front piece

Tx Firefighter · 10-21-2003, 10:22 PM

.

Tx Firefighter · 10-21-2003, 10:31 PM

.

Tx Firefighter · 10-21-2003, 10:37 PM

.

10-20-2003, 05:52 PM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Parting out 68 SWB truck See pictures. Cab $250 decent, needs rockers, cab corners are solid. Non AC. I'll be keeping some small parts from inside the cab. Chassis $400 sticker says 3.73 posi, but I jacked it up and it seems non posi. Complete rolling. I removed the steering box, tranny crossmember, and front coil springs. I'll throw in a set of springs though, if you buy it. Rascal is straight! Doors $50 each left one is kind of crappy. Right one is better, no rust showing through on bottom Bed $200 it's pretty much a turd. Steel floor with gate. I'd say it's a 3 or 4 on a 1-10 (by Texas standards). This truck was bought in Texas (still has dealer plate on tailgate) and used at my local airport for work truck. I'm in DFW area. We don't get rust here like some places. I'm a decent welder, and I could have the rockers on and all repair done in 4-5 hrs. Does not need floors. Have no title to this truck. __________________ I'm on the Instagram- @Gearhead_Kevin

10-20-2003, 06:20 PM	#4
Bryan68custom Registered User Join Date: Aug 2003 Location: Denison, Tx. Posts: 189	Does it have the e-brake cover on it ???? __________________ 2004 Extended cab LS silverado 2001 Buick Lesabre 1968 Chevy Custom 10 LWB Anniversery model 2008 crew cab lt (rolling on dubs) "The nice part about living in a small town is when you don't know what you're doing, someone else always does"

10-20-2003, 06:22 PM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	show me what one looks like. There are boxes and boxes of parts to look through. __________________ I'm on the Instagram- @Gearhead_Kevin

10-20-2003, 06:25 PM	#6
Bryan68custom Registered User Join Date: Aug 2003 Location: Denison, Tx. Posts: 189	I dont have a pic there was some on the message board a while back I'll see if Ican find it. __________________ 2004 Extended cab LS silverado 2001 Buick Lesabre 1968 Chevy Custom 10 LWB Anniversery model 2008 crew cab lt (rolling on dubs) "The nice part about living in a small town is when you don't know what you're doing, someone else always does"

10-20-2003, 07:47 PM	#8
67swbc10 Registered User Join Date: Sep 2002 Location: lancaster Tx. Posts: 60	Can I get more info on the bed and pics of rust or dents. Thanks Mario __________________ 1967 Chevy SWB

10-20-2003, 05:56 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	pic 2 - Left rocker

10-20-2003, 05:58 PM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162

10-20-2003, 07:58 PM	#9
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Mario, this is the only other picture I have right now. It will be tomorrow or the next day when I can take another. __________________ I'm on the Instagram- @Gearhead_Kevin

10-20-2003, 09:16 PM	#10
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	What type of drivetrain was in it? If factory smallblock/th350 combo, I need a drive shaft. Thanks __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

10-20-2003, 09:21 PM	#11
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	This truck was a little hot rod. The glove box door says 327 V8, auto tranny, and 3.73 posi trac rearend......but, the driveshaft is long gone. Sorry __________________ I'm on the Instagram- @Gearhead_Kevin

10-20-2003, 10:03 PM	#12
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	We'd call that a "Rust Free" truck, up here. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-21-2003, 10:04 PM	#13
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	. __________________ I'm on the Instagram- @Gearhead_Kevin

10-21-2003, 10:11 PM	#14
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	The arrow is pointing to a dent. __________________ I'm on the Instagram- @Gearhead_Kevin

10-21-2003, 10:12 PM	#15
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	. __________________ I'm on the Instagram- @Gearhead_Kevin

10-21-2003, 10:14 PM	#16
slim shaney Registered User Join Date: Aug 2003 Location: magazine arkansas Posts: 14	how good is the pass side rear fender and bed front piece



Register or Log In To remove these advertisements.

10-21-2003, 10:22 PM	#17
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	. __________________ I'm on the Instagram- @Gearhead_Kevin

10-21-2003, 10:31 PM	#18
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	. __________________ I'm on the Instagram- @Gearhead_Kevin

10-21-2003, 10:37 PM	#19
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	. __________________ I'm on the Instagram- @Gearhead_Kevin

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.