'49 Chevy brake upgrade

[Russell Ashley]

I didn't get mine from Speedway Motors but I think it's the same kit that I used. I bought mine at Tuckers and it came from CPP, which is probably where that one will come from. It's easy to install and my truck stops great. If you aren't replacing the tie rod ends and king pins and bushings at the same time it's an easy Saturday job. Keep in mind that you will need the appropriate master cylinder for disk/drum brakes. I added a power booster from Tuckers (also CPP) at the same time. It's also a fairly easy install but you will have to replace or at least re-configure your brake lines which adds to the time required.