49 1/2 ton, S10 frame- wheels? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

el_diablo · 11-21-2012, 12:44 PM

I apologize if this has been asked before, but.. What size wheels are you guys running? How wide can you fit? What offsets?

My '49 is on a '86 S10 frame.

BlueJeep · 11-21-2012, 07:05 PM

Stock 15x7 s10 wheels, 3.75ish backspacing, 235/75R15 tires.

mr48chev · 11-21-2012, 07:15 PM

One of the best parts about an S-10 swap is that you can run some really deep reverse wheels and get away with it without having the fenders rub the tires.
A lot of the guys who aren't running reverse or wider rims and bigger tires run spacers to move the wheels out in the wheel well.

98layinframe · 11-22-2012, 07:16 PM

Out back I have a 4x4 s10 rearend with 18x9.5" torque thrust II's running a 3.75" backspace and they clear the fender lips perfectly. But with a wide wheel and wide 275 series tire it requires a small wheel tub in the bed side.

I slapped my wheels on a buddies truck running the same 4x4 s10 rear but he has 1" thick adapters on and so the tires wouldn't fully tuck on a bagged truck without rubbing the fenders, but would of worked great on a static height truck... without any need for the wheel tubs in the bed sides.
Posted via Mobile Device

S10Fan · 11-22-2012, 08:20 PM

I knew I'd be running hubcaps on mine so I went with wheels from Circle Racing. 15X7 on all 4 corners with 2" BS on the front and 1" BS on the rear. The racing wheels required use of 5/8 wheel studs so all the hubs and axles had to be drilled for the much larger studs. I also had to buy an additional wheel for a spare, 1" BS.

S10Fan · 11-22-2012, 08:29 PM

I forgot to add.....

Circle had a bunch of wheels in their "clearance" section, 2 of my wheels are black powder coat, 1 is chrome, 1 bare steel, I averaged 35.00 each for my setup.

el_diablo · 11-26-2012, 10:22 AM

Thanks guys. I want to run a 15x10 with 315/60 drag radials. (about 29.5x10.5") Hopefully I can get them to fit without doing anything crazy.

11-21-2012, 12:44 PM	#1
el_diablo Registered User Join Date: Nov 2012 Location: Guthrie, Oklahoma Posts: 12	49 1/2 ton, S10 frame- wheels? I apologize if this has been asked before, but.. What size wheels are you guys running? How wide can you fit? What offsets? My '49 is on a '86 S10 frame. __________________ '49 Chevy 5window/S-10 frame. LS 408ci/4l80 '71 Chevy C10- Sold a long time ago.

11-21-2012, 07:05 PM	#2
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	Re: 49 1/2 ton, S10 frame- wheels? Stock 15x7 s10 wheels, 3.75ish backspacing, 235/75R15 tires. __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler

11-21-2012, 07:15 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,496	Re: 49 1/2 ton, S10 frame- wheels? One of the best parts about an S-10 swap is that you can run some really deep reverse wheels and get away with it without having the fenders rub the tires. A lot of the guys who aren't running reverse or wider rims and bigger tires run spacers to move the wheels out in the wheel well. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

11-22-2012, 07:16 PM	#4
98layinframe Registered User Join Date: Oct 2011 Location: Pittsburgh Pa Posts: 267	Re: 49 1/2 ton, S10 frame- wheels? Out back I have a 4x4 s10 rearend with 18x9.5" torque thrust II's running a 3.75" backspace and they clear the fender lips perfectly. But with a wide wheel and wide 275 series tire it requires a small wheel tub in the bed side. I slapped my wheels on a buddies truck running the same 4x4 s10 rear but he has 1" thick adapters on and so the tires wouldn't fully tuck on a bagged truck without rubbing the fenders, but would of worked great on a static height truck... without any need for the wheel tubs in the bed sides. Posted via Mobile Device __________________ 91 s10 - bagged bodydropped 4", 350/700R4, narrowed reared, cantilever rear air bag setup 1951 chevy 3100 - in build/acquiring parts process. Have full C4 Corvette suspension front and rear, tpi 350, 700r4, 18" torque thrust II wheels Last edited by 98layinframe; 11-22-2012 at 07:23 PM.

11-22-2012, 08:20 PM	#5
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: 49 1/2 ton, S10 frame- wheels? I knew I'd be running hubcaps on mine so I went with wheels from Circle Racing. 15X7 on all 4 corners with 2" BS on the front and 1" BS on the rear. The racing wheels required use of 5/8 wheel studs so all the hubs and axles had to be drilled for the much larger studs. I also had to buy an additional wheel for a spare, 1" BS. __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

11-22-2012, 08:29 PM	#6
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: 49 1/2 ton, S10 frame- wheels? I forgot to add..... Circle had a bunch of wheels in their "clearance" section, 2 of my wheels are black powder coat, 1 is chrome, 1 bare steel, I averaged 35.00 each for my setup. __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

11-26-2012, 10:22 AM	#7
el_diablo Registered User Join Date: Nov 2012 Location: Guthrie, Oklahoma Posts: 12	Re: 49 1/2 ton, S10 frame- wheels? Thanks guys. I want to run a 15x10 with 315/60 drag radials. (about 29.5x10.5") Hopefully I can get them to fit without doing anything crazy. __________________ '49 Chevy 5window/S-10 frame. LS 408ci/4l80 '71 Chevy C10- Sold a long time ago.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.