Inner fender to cab mount - The 1947 - Present Chevrolet & GMC Truck Message Board Network

66farmer · 11-27-2012, 10:42 AM

Why did this kit come with (4) grommets. I know were two of them go not sure of the other two.

Thanks for the help

Hx16457 · 11-27-2012, 11:25 AM

I had the same question, I never used the other two..... When I took the truck apart there where only two used.....

61K10 · 11-30-2012, 01:42 PM

this one came off a 61 and is org. the grommet is sandwiched and a bushing going through the middle where the bolt goes. so one is used on each side of the inner fender. don't know about other years.

**Clyde65** · 11-30-2012, 08:14 PM

My 65 was just like above, sandwiched.
Posted via Mobile Device

**Captainfab** · 12-01-2012, 02:21 AM

All the ones I remember, were 2 grommets each side, with the tube thru the center. And I believe the correct bolt is a shoulder bolt.

11-27-2012, 10:42 AM	#1
66farmer Registered User Join Date: Jun 2007 Location: North Plains Oregon Posts: 684	Inner fender to cab mount Why did this kit come with (4) grommets. I know were two of them go not sure of the other two. Thanks for the help Attached Images

11-27-2012, 11:25 AM	#2
Hx16457 Registered User Join Date: Sep 2012 Location: Lawton Oklahoma Posts: 308	Re: Inner fender to cab mount I had the same question, I never used the other two..... When I took the truck apart there where only two used..... __________________ People who make excuses didn't want to do it in the first place! http://s1326.photobucket.com/albums/...cpZZ1QQtppZZ16

11-30-2012, 01:42 PM	#3
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: Inner fender to cab mount this one came off a 61 and is org. the grommet is sandwiched and a bushing going through the middle where the bolt goes. so one is used on each side of the inner fender. don't know about other years. Attached Images __________________ 1961 chevy K10 my build is------------61K10 build

11-30-2012, 08:14 PM	#4
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Inner fender to cab mount My 65 was just like above, sandwiched. Posted via Mobile Device __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

12-01-2012, 02:21 AM	#5
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Inner fender to cab mount All the ones I remember, were 2 grommets each side, with the tube thru the center. And I believe the correct bolt is a shoulder bolt. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.