Original magnesium 1st generation Torque Thrusts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71GeneralMotorsCorp · 12-02-2012, 02:20 AM

American Racing magnesium 1st generation Torque Thrusts.. these are true 1st gens because of the round spokes and no lip on outer ring. I know these are rare, but no idea on price. attached is a picture of one of mine.

**special-K** · 12-02-2012, 07:39 AM

Do you have a set? What size...lug pattern? They are all rare with a good value,but knowing how to value the set depends on what you have.

71GeneralMotorsCorp · 12-02-2012, 11:00 AM

I have a full set, 15 inch 5 on 5 lug pattern.

**special-K** · 12-02-2012, 07:58 PM

I wondering if they are the same width or big 'n' little,and what width. But,I'd take a guess and say $300-500 or $800-1,000 to the right collector. If you bring the finish back maybe more. But,some may want them untouched. CG just recently bought a set for his F100 Unibody. Maybe rattle his cage and see what he says.

12-02-2012, 02:20 AM	#1
71GeneralMotorsCorp Registered User Join Date: Jul 2011 Location: Kansas Posts: 266	Original magnesium 1st generation Torque Thrusts American Racing magnesium 1st generation Torque Thrusts.. these are true 1st gens because of the round spokes and no lip on outer ring. I know these are rare, but no idea on price. attached is a picture of one of mine.

12-02-2012, 07:39 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Original magnesium 1st generation Torque Thrusts Do you have a set? What size...lug pattern? They are all rare with a good value,but knowing how to value the set depends on what you have. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-02-2012, 11:00 AM	#3
71GeneralMotorsCorp Registered User Join Date: Jul 2011 Location: Kansas Posts: 266	Re: Original magnesium 1st generation Torque Thrusts I have a full set, 15 inch 5 on 5 lug pattern.

12-02-2012, 07:58 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Original magnesium 1st generation Torque Thrusts I wondering if they are the same width or big 'n' little,and what width. But,I'd take a guess and say $300-500 or $800-1,000 to the right collector. If you bring the finish back maybe more. But,some may want them untouched. CG just recently bought a set for his F100 Unibody. Maybe rattle his cage and see what he says. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.