NC 250 6 cylinder power steering brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**NC67Chev** · 09-22-2011, 02:54 PM

Up for grabs is a power steering set-up for a 250 6 cylinder. The part numbers on the brackets are: 3973156 and 3973157. My research shows these being used on cars from 70 - 72. This particular setup positions the power steering pulley on the first groove of the water pump & damper.

In order to complete this setup, you will need a 2 groove water pump pulley...p/n 3995646AH will work perfectly. You will also need a 2 groove alternator pulley, which can be had at any decent alternator shop. I'm not including the pulleys because I would have to pay more $ for them, and don't want to raise the price any higher.

I think the pump is good but it was pulled from a non-running car, so I'm not sure. It will definitely clean up nicely. $150 plus shipping

OLEBEATER · 09-22-2011, 03:00 PM

How much?

**NC67Chev** · 09-22-2011, 03:05 PM

Quote:

Originally Posted by OLEBEATER

How much?

$150 plus shipping

OLEBEATER · 09-22-2011, 03:09 PM

I'll pass.........thanks.

**NC67Chev** · 09-30-2011, 11:12 AM

Offers? What if I round up a 2 groove WP pulley?

longbed67 · 09-30-2011, 01:45 PM

Interested, pending on some other possible sales.

sfcharr · 12-09-2012, 06:31 PM

is this still available?

bulldawg2 · 12-10-2012, 10:09 PM

I will offer $135 shipped to 30127- Atlanta GA area. Let me know

**NC67Chev** · 12-11-2012, 10:02 AM

Sorry guys, this set-up is long gone. All I have left is a 2 groove water pump pulley and an add-on 3rd groove.
Posted via Mobile Device
Posted via Mobile Device

**PICKMUP** · 12-12-2012, 08:44 PM

I am interested in the add-on 3rd pulley. Price? thanks, frank

**NC67Chev** · 12-12-2012, 09:56 PM

Hi Frank,

Is $15 okay? Here's a pic of it, along with the double pulley, in an old post:

http://67-72chevytrucks.com/vboard/s...d.php?t=533940
Posted via Mobile Device
Posted via Mobile Device

**slepysal** · 12-13-2012, 08:57 PM

what you looking to get for double ?

**PICKMUP** · 12-14-2012, 04:26 PM

Quote:

Originally Posted by NC67Chev

Hi Frank,

Is $15 okay? Here's a pic of it, along with the double pulley, in an old post:

http://67-72chevytrucks.com/vboard/s...d.php?t=533940
Posted via Mobile Device
Posted via Mobile Device

That is good. PM me your PayPal addy with total & I will send payment right out. thanks, frank

**NC67Chev** · 12-14-2012, 08:21 PM

Quote:

Originally Posted by slepysal

what you looking to get for double ?

How about $15 plus shipping?
Posted via Mobile Device

**slepysal** · 12-15-2012, 12:26 AM

Quote:

Originally Posted by NC67Chev

How about $15 plus shipping?
Posted via Mobile Device

total shiped to ca 95131?

**NC67Chev** · 12-15-2012, 10:34 AM

Quote:

Originally Posted by slepysal

total shiped to ca 95131?

PM sent
Posted via Mobile Device

09-22-2011, 02:54 PM	#1
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	250 6 cylinder power steering brackets Up for grabs is a power steering set-up for a 250 6 cylinder. The part numbers on the brackets are: 3973156 and 3973157. My research shows these being used on cars from 70 - 72. This particular setup positions the power steering pulley on the first groove of the water pump & damper. In order to complete this setup, you will need a 2 groove water pump pulley...p/n 3995646AH will work perfectly. You will also need a 2 groove alternator pulley, which can be had at any decent alternator shop. I'm not including the pulleys because I would have to pay more $ for them, and don't want to raise the price any higher. I think the pump is good but it was pulled from a non-running car, so I'm not sure. It will definitely clean up nicely. $150 plus shipping Attached Images __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar Last edited by NC67Chev; 09-22-2011 at 03:04 PM. Reason: Forgot to list price

09-22-2011, 03:00 PM	#2
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: 250 6 cylinder power steering brackets How much?

09-22-2011, 03:09 PM	#4
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: 250 6 cylinder power steering brackets I'll pass.........thanks.

09-30-2011, 11:12 AM	#5
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: 250 6 cylinder power steering brackets Offers? What if I round up a 2 groove WP pulley? __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

09-30-2011, 01:45 PM	#6
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: 250 6 cylinder power steering brackets Interested, pending on some other possible sales.

12-09-2012, 06:31 PM	#7
sfcharr Registered User Join Date: Aug 2010 Location: Castle Rock CO Posts: 76	Re: 250 6 cylinder power steering brackets is this still available?

12-10-2012, 10:09 PM	#8
bulldawg2 Registered User Join Date: Nov 2012 Location: Powder Springs GA Posts: 15	Re: 250 6 cylinder power steering brackets I will offer $135 shipped to 30127- Atlanta GA area. Let me know

12-11-2012, 10:02 AM	#9
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: 250 6 cylinder power steering brackets Sorry guys, this set-up is long gone. All I have left is a 2 groove water pump pulley and an add-on 3rd groove. Posted via Mobile Device Posted via Mobile Device __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

12-12-2012, 08:44 PM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,143	Re: 250 6 cylinder power steering brackets I am interested in the add-on 3rd pulley. Price? thanks, frank __________________ Email: frankeham@comcast.net Phone: 360-956-7170

12-12-2012, 09:56 PM	#11
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: 250 6 cylinder power steering brackets Hi Frank, Is $15 okay? Here's a pic of it, along with the double pulley, in an old post: http://67-72chevytrucks.com/vboard/s...d.php?t=533940 Posted via Mobile Device Posted via Mobile Device __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

12-13-2012, 08:57 PM	#12
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: 250 6 cylinder power steering brackets what you looking to get for double ? __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.