|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-16-2012, 09:38 PM
|
#1 |
|
My Carbon Footprint
Join Date: Oct 2008
Location: Orygun
Posts: 5,527
|
Anyone running a converted Dana 60 in their coiled shortbed?
It will be only a matter of time before my new 496 gernades my 12 bolt. Thinking about a Dana 60 for obvious reasons. They came in everything and they are everywhere. My concern is to find one that is the same length as the stock 12 bolt in my '68 so I don't have to order new 15x14 wheels. Actually longer would be even better because the ends will have to be cut off anyway for the conversion. Any thoughts??
|
|
|
|
12-16-2012, 10:17 PM
|
#2 |
|
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: Anyone running a converted Dana 60 in their coiled shortbed?
A C/20 big block auto coil axle would give you a bolt in housing. Trouble is it would be a full floater. Maybe it would be a good basis for a conversion though.
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
|
|
|
|
12-16-2012, 10:33 PM
|
#3 |
|
My Carbon Footprint
Join Date: Oct 2008
Location: Orygun
Posts: 5,527
|
Re: Anyone running a converted Dana 60 in their coiled shortbed?
I fully realize I will be cuting the ends off for the conversion. Given the fact that they came in long beds, will the trailing arm brackets on the rear end be in the right place? Didn't know if the trailing arms are longer and wider in a 20.
|
|
|
|
|
12-16-2012, 11:15 PM
|
#4 |
|
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: Anyone running a converted Dana 60 in their coiled shortbed?
Pretty sure they all mount up the same. The parts manual shows the same service part trailing arm for 60-72 C10-20. But if I remember correctly the 20s have the strap along the bottom and production 10s do not.
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
|
|
|
|
12-16-2012, 11:50 PM
|
#5 |
|
My Carbon Footprint
Join Date: Oct 2008
Location: Orygun
Posts: 5,527
|
Re: Anyone running a converted Dana 60 in their coiled shortbed?
Man that would simplify things if I could find one.
Posted via Mobile Device |
|
|
|
|
12-17-2012, 12:10 AM
|
#6 |
|
My Carbon Footprint
Join Date: Oct 2008
Location: Orygun
Posts: 5,527
|
Re: Anyone running a converted Dana 60 in their coiled shortbed?
I got someone telling me he didn't think these came with Dana's but rather the GM 14 bolt. ???
|
|
|
|
|
12-17-2012, 12:14 AM
|
#7 |
|
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
Re: Anyone running a converted Dana 60 in their coiled shortbed?
the GMC 2500s had full float 60s. the chevy 20s had eaton HO52s
as far as i know all GMCs were leaf sprung. |
|
|
|
|
12-17-2012, 12:21 AM
|
#8 |
|
Senior Member
 
Join Date: Jan 2002
Location: Williston, ND
Posts: 2,999
|
Re: Anyone running a converted Dana 60 in their coiled shortbed?
All of the 69-72 3/4t trucks I have had were equipped with a d60
__________________
68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi |
|
|
|
|
12-17-2012, 01:02 AM
|
#9 |
|
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: Anyone running a converted Dana 60 in their coiled shortbed?
Here this should clear things up. Factory '72 C20 powertrain chart listing the Dana 5500 axle application. Here is a parts manual showing the different Dana C20 applications as well. Then pages from the Spicer manual. Title Chevy page and C10 C15 C20 applications with BOM numbers. There are also Dana C25 and K25 leaf applications too. Apparently there was also a '70 down 396 Dana application that I didn't remember. It is not listed in the GM parts manual but the applications for '70 down show except for leaf, 396 or 4x4. So it is confirmed by not being there as a 12 bolt.
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
|
|
|
|
12-17-2012, 08:15 AM
|
#10 |
|
Special Order
  
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: Anyone running a converted Dana 60 in their coiled shortbed?
They are rare,but some GMC 1/2 tons had dana60 6-lugs. I had hoped to find one,but in reality I think I'm looking at the same issue,either find a coil C2500 rear or convert a leaf rear to coil. Then,I'll be talking to www.markwilliams.com
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
