80 suburban for sale cheap! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RED72blazer · 10-26-2003, 03:53 PM

I have a 80 suburban I need to get rid of quick! It is a 1/2 ton 2wd 350/350 it has a blown head gasket. It still runs and drives, has lots of good parts or fix head gasket and go. $300 obo
must sell!!!!!!!!!!!!!!!!!!!1

Russell · 10-26-2003, 04:01 PM

Are you willing to part out some of the front clip and interior peices?

RED72blazer · 10-26-2003, 04:22 PM

If it doesn't sell this week I will be taking some parts for my 76 burban and crushing. If I got enough interest in parting it out I could do that. post what you want

Russell · 10-26-2003, 04:30 PM

Front clip components, aka signal light covers (if they arn't damaged) the front bezels (if straight, and sit right) as well as the door panel trim if they are the same as the ones on my 80 Sierra Classic (see my restoration log for pictures) Also power lock switches, and the double power window switch for the driver's side.

RED72blazer · 10-26-2003, 04:36 PM

I know that the turn signal lens are good, I'm not sure about the bezels, I'll have to check. Intierior is custom deluxe trim level

Russell · 10-26-2003, 04:54 PM

Does the interior look like this?

RED72blazer · 10-26-2003, 06:06 PM

no it's blue and all plastic

Russell · 10-26-2003, 11:21 PM

alright.

Does the burban have a stock engine in it? If so is it a 5.7 litre V8?

RED72blazer · 10-27-2003, 12:30 AM

yes, it's stock and has 5.7

soleeagle · 10-27-2003, 12:47 AM

If you werent on the other side of the USA I would love to take it off your hands.

Russell · 10-27-2003, 01:14 AM

Can you do me a favour and take some pictures of the vaccume setup? Thats if you have a Carter Carb on it. It will be on a GMC engine.

*crosses finger and hopes it is a GMC suburban*

RED72blazer · 10-27-2003, 12:55 PM

sorry, it's a chevy and has a quadrajet

RED72blazer · 10-27-2003, 01:08 PM

would pictures help to sell?

Russell · 10-27-2003, 10:05 PM

Definitly!

10-26-2003, 03:53 PM	#1
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	80 suburban for sale cheap or parts if enough interest I have a 80 suburban I need to get rid of quick! It is a 1/2 ton 2wd 350/350 it has a blown head gasket. It still runs and drives, has lots of good parts or fix head gasket and go. $300 obo must sell!!!!!!!!!!!!!!!!!!!1 __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage. Last edited by RED72blazer; 10-27-2003 at 04:12 PM.

10-26-2003, 04:01 PM	#2
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Are you willing to part out some of the front clip and interior peices? __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

10-26-2003, 04:22 PM	#3
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	If it doesn't sell this week I will be taking some parts for my 76 burban and crushing. If I got enough interest in parting it out I could do that. post what you want __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

10-26-2003, 04:30 PM	#4
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Front clip components, aka signal light covers (if they arn't damaged) the front bezels (if straight, and sit right) as well as the door panel trim if they are the same as the ones on my 80 Sierra Classic (see my restoration log for pictures) Also power lock switches, and the double power window switch for the driver's side. __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

10-26-2003, 04:36 PM	#5
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	I know that the turn signal lens are good, I'm not sure about the bezels, I'll have to check. Intierior is custom deluxe trim level __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

10-26-2003, 04:54 PM	#6
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Does the interior look like this? __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

10-26-2003, 06:06 PM	#7
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	no it's blue and all plastic __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

10-26-2003, 11:21 PM	#8
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	alright. Does the burban have a stock engine in it? If so is it a 5.7 litre V8? __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

10-27-2003, 12:30 AM	#9
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	yes, it's stock and has 5.7 __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

10-27-2003, 12:47 AM	#10
soleeagle Registered User Join Date: Sep 2003 Location: Shelbyville, Indiana Posts: 614	If you werent on the other side of the USA I would love to take it off your hands. __________________ Chuck '85 Chevy Silverado 4X4 '91 Chevy 4X4 Suburban http://www.cardomain.com/memberpage/545941

10-27-2003, 01:14 AM	#11
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Can you do me a favour and take some pictures of the vaccume setup? Thats if you have a Carter Carb on it. It will be on a GMC engine. crosses finger and hopes it is a GMC suburban __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

10-27-2003, 12:55 PM	#12
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	sorry, it's a chevy and has a quadrajet __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

10-27-2003, 01:08 PM	#13
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	would pictures help to sell? __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

10-27-2003, 10:05 PM	#14
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Definitly! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.