She's a ton of fun (dually build on air) - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rusbuilt · 02-25-2013, 03:40 PM

Quote:

Originally Posted by ncC20

Let me start by saying i love your truck. I have a 72 c20 custom camper that when i bought want to make into a dually but didnt wanna take on such a project so i just took installed a 5 lug setup lowered it down and rode like that but sitting here in Afghanistan ive been looking more and more at it and once i get home i think maybe you"ll have all the guess work taken out of it and i can jus hit you up with all my guestions for parts. Please keep up the good work i look forward daily to checking out the build

Thank you! I'll be happy to share all of the ins and outs of my build and any questions you may have I will answer to the best of my knowledge!

Quote:

Originally Posted by dirish

I need more! Cant wait to see the wheels with rubber, this is going to be sick!
Posted via Mobile Device

Soon sir! I hope to start in on my chassis this week!

jkeating1 · 02-27-2013, 01:40 PM

I didn't know that 93-95 NV4500s have a different size bearing retainer & belhousing index hole than the 96-up. The bolt pattern on the front of the trans is different also. AND--all have the slave cyl on the passenger side.

One way to use a 4500 with either a standard GM cast iron mechanical clutch fork or hydrulic slave, and have it on the left side is with an Advance Adapter bell: http://www.advanceadapters.com/produ...llhousing-kit/

All that dough pretty well cinches the NV3500 in my book. I assume the NV3500 slave cyl is on the left side, huh?

Rusbuilt · 02-27-2013, 01:47 PM

I think it depends on what year, I've seen them on both sides. It really doesn't matter to me though because I plan to run the hydraulic slave and I'll just run my lines.

jkeating1 · 02-27-2013, 02:38 PM

That--and it may be driven by 2WD/4WD undercarriage, because of the shaft on the left
Posted via Mobile Device

5150 · 03-01-2013, 05:13 PM

I know where some 18 inch 10 holes are.
Posted via Mobile Device

Rusbuilt · 03-01-2013, 05:55 PM

I think the big holes have a cool look.

Bryan do you mean 10 hole or 10 lug?
Posted via Mobile Device

5150 · 03-01-2013, 06:55 PM

10 lug, sorry.
Posted via Mobile Device

Rusbuilt · 03-02-2013, 12:20 AM

Quote:

Originally Posted by 5150

10 lug, sorry.
Posted via Mobile Device

Idk if I've ever seen an 10 lug 18" wheel! Can you get a pic?

502ms · 03-02-2013, 08:48 AM

Ready for some action
Posted via Mobile Device

**lolife99** · 03-02-2013, 10:28 AM

I like this website:
http://www.tnwheelandtire.com/site/769454/page/923583

I also like their wheel adapters better than the ones you posted.
They are front and rear specific.

Rusbuilt · 03-02-2013, 06:12 PM

Quote:

Originally Posted by lolife99

I like this website:
http://www.tnwheelandtire.com/site/769454/page/923583

I also like their wheel adapters better than the ones you posted.
They are front and rear specific.

Keith those are the adapters I plan to use! Jk had posted the ones above. TN wheel and tire will be milling my wheels also.
Posted via Mobile Device

**lolife99** · 03-02-2013, 06:26 PM

Quote:

Originally Posted by Rusbuilt

Keith those are the adapters I plan to use! Jk had posted the ones above. TN wheel and tire will be milling my wheels also.
Posted via Mobile Device

Cool.
I see the used 22.5's on Craigslist, but people want crazy prices for them around here.

5150 · 03-02-2013, 11:23 AM

Quote:

Idk if I've ever seen an 10 lug 18" wheel! Can you get a pic?

They are off of a motorhome. I'm over in your old neck of the woods for the day. They are at board member Woodridge's place up in Maynardville. I'll see if I can get a pic.
Posted via Mobile Device

Rusbuilt · 03-02-2013, 06:33 PM

Yeah I lucked up on these 4 I bought. I think I have a line on the other two I need also!!
Posted via Mobile Device

**lolife99** · 03-02-2013, 06:57 PM

Cool.
I know you wanted the 7.5" version,... but a 265/35-22 tire, will fit better on a 8.5" wide wheel.

Rusbuilt · 03-02-2013, 09:40 PM

Thats true, I had considered my tire height but not the width.

ThreeQtr · 03-03-2013, 09:52 AM

Not to keep posting pics of other trucks, but maybe some one with photoshop could lower this to get a better idea of the look your after. At least its blue.

Rusbuilt · 03-03-2013, 11:57 PM

I like that truck, I've seen a few pics of it on here!

jkeating1 · 03-04-2013, 12:21 AM

thats an interesting photo---the gas filler neck is in the shot, indicating the pic is reversed, yet the "pods" logo is not reversed.

ThreeQtr · 03-04-2013, 07:49 AM

You noticed, I did reverse it (forget why) and the pods sign. I also used the trees to cover a house being built in the background. But I only have Paint, which takes alot to piece the wheels together. As far as I know it's the only way to get a lowered look with Paint (tucking them up into the wheelwells).

JRANGER · 03-04-2013, 10:45 AM

Here ya go...Not perfect but

Rusbuilt · 03-04-2013, 04:40 PM

Bags all the way! I can't wait!

5150 · 03-07-2013, 07:58 PM

Here you go Rus, sorry for the delay 18x6's

JRANGER · 03-07-2013, 08:13 PM

I like the rims rus got better then those lol

Rusbuilt · 03-07-2013, 10:46 PM

Those are still cool! I've not seen 18" ten lug wheels before.

02-27-2013, 01:40 PM	#2
jkeating1 Registered User Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: She's a ton of fun (dually build on air) I didn't know that 93-95 NV4500s have a different size bearing retainer & belhousing index hole than the 96-up. The bolt pattern on the front of the trans is different also. AND--all have the slave cyl on the passenger side. One way to use a 4500 with either a standard GM cast iron mechanical clutch fork or hydrulic slave, and have it on the left side is with an Advance Adapter bell: http://www.advanceadapters.com/produ...llhousing-kit/ All that dough pretty well cinches the NV3500 in my book. I assume the NV3500 slave cyl is on the left side, huh? __________________ JK

02-27-2013, 01:47 PM	#3
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: She's a ton of fun (dually build on air) I think it depends on what year, I've seen them on both sides. It really doesn't matter to me though because I plan to run the hydraulic slave and I'll just run my lines. __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

02-27-2013, 02:38 PM	#4
jkeating1 Registered User Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: She's a ton of fun (dually build on air) That--and it may be driven by 2WD/4WD undercarriage, because of the shaft on the left Posted via Mobile Device __________________ JK

03-01-2013, 05:13 PM	#5
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: She's a ton of fun (dually build on air) I know where some 18 inch 10 holes are. Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

03-01-2013, 05:55 PM	#6
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: She's a ton of fun (dually build on air) I think the big holes have a cool look. Bryan do you mean 10 hole or 10 lug? Posted via Mobile Device __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-01-2013, 06:55 PM	#7
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: She's a ton of fun (dually build on air) 10 lug, sorry. Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

03-02-2013, 08:48 AM	#9
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: She's a ton of fun (dually build on air) Ready for some action Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

03-02-2013, 10:28 AM	#10
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,717	Re: She's a ton of fun (dually build on air) I like this website: http://www.tnwheelandtire.com/site/769454/page/923583 I also like their wheel adapters better than the ones you posted. They are front and rear specific. Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-02-2013, 06:33 PM	#14
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: She's a ton of fun (dually build on air) Yeah I lucked up on these 4 I bought. I think I have a line on the other two I need also!! Posted via Mobile Device __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-02-2013, 06:57 PM	#15
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,717	Re: She's a ton of fun (dually build on air) Cool. I know you wanted the 7.5" version,... but a 265/35-22 tire, will fit better on a 8.5" wide wheel. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-02-2013, 09:40 PM	#16
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: She's a ton of fun (dually build on air) Thats true, I had considered my tire height but not the width. __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-03-2013, 09:52 AM	#17
ThreeQtr Registered User Join Date: Dec 2010 Location: Port St Lucie,FL Posts: 203	Re: She's a ton of fun (dually build on air) Not to keep posting pics of other trucks, but maybe some one with photoshop could lower this to get a better idea of the look your after. At least its blue. Attached Images

03-03-2013, 11:57 PM	#18
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: She's a ton of fun (dually build on air) I like that truck, I've seen a few pics of it on here! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-04-2013, 12:21 AM	#19
jkeating1 Registered User Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: She's a ton of fun (dually build on air) thats an interesting photo---the gas filler neck is in the shot, indicating the pic is reversed, yet the "pods" logo is not reversed. __________________ JK

03-04-2013, 07:49 AM	#20
ThreeQtr Registered User Join Date: Dec 2010 Location: Port St Lucie,FL Posts: 203	Re: She's a ton of fun (dually build on air) You noticed, I did reverse it (forget why) and the pods sign. I also used the trees to cover a house being built in the background. But I only have Paint, which takes alot to piece the wheels together. As far as I know it's the only way to get a lowered look with Paint (tucking them up into the wheelwells).



Register or Log In To remove these advertisements.

03-04-2013, 10:45 AM	#21
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: She's a ton of fun (dually build on air) Here ya go...Not perfect but Attached Images __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

03-04-2013, 04:40 PM	#22
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: She's a ton of fun (dually build on air) Bags all the way! I can't wait! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-07-2013, 07:58 PM	#23
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: She's a ton of fun (dually build on air) Here you go Rus, sorry for the delay 18x6's __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

03-07-2013, 08:13 PM	#24
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: She's a ton of fun (dually build on air) I like the rims rus got better then those lol __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

03-07-2013, 10:46 PM	#25
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: She's a ton of fun (dually build on air) Those are still cool! I've not seen 18" ten lug wheels before. __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.