|
01-01-2013, 11:53 AM
|
#1 |
|
Registered User
Join Date: Dec 2012
Location: cape codmass
Posts: 57
|
hei in a 250 six
Ive searched and cannot find any info for installing an hei distributor in my 250 six.Ive seen numerous pics with them on one but no info.Anyone have the details?I dont really care for the looks of them and Im familiar with the pertronic units but ive retrofit them on v8s in the past with good results,the hei that is.thanks ron
|
|
|
|
01-01-2013, 12:01 PM
|
#2 |
|
Registered User
Join Date: May 2010
Location: Hillsboro, Oregon 97123
Posts: 1,300
|
Re: hei in a 250 six
I just pulled one out of a newer 6 banger.....at pick and pull
__________________
Measure with a yard stick Mark with Chalk Cut with a torch  Built it yourself, don't count on others to to do it for you or with you. It will never get done |
|
|
|
|
01-01-2013, 12:35 PM
|
#3 |
|
Registered User
Join Date: Aug 2011
Location: Tahlequah, Ok
Posts: 1,235
|
Re: hei in a 250 six
Any 250 or 292 HEI will work, they make a built in coil ( on top of the cap like a V8 ) and a seperate coil that is usually bolted to the side covers. Just drop it in and run a 12 volt wire from the fuse box that comes on with the key and you are good to go.
I have done countless of these change overs. You can get the HEI out of cars or trucks, novas had 6 cylinders alot.
__________________
1965 long bed ( grandpas old truck ) 1964 long bed BBW Custom Cab 1966 Short stepside 1964 long bed 1965 long bed Custom Cab, factory air, V-8, powerglide |
|
|
|
|
01-01-2013, 02:28 PM
|
#4 |
|
Registered User
Join Date: Dec 2012
Location: cape codmass
Posts: 57
|
Re: hei in a 250 six
That shows how much i know about 6 bangers,I thought the v6s and v8s dominated the years of the hei,never knew the straight 6s had them.thank for the info ron
|
|
|
|
|
01-01-2013, 04:21 PM
|
#5 |
|
Registered User
 
Join Date: Oct 2006
Location: San Jose NOR*CAL
Posts: 3,080
|
Re: hei in a 250 six
you can also run a pertronix kit way easy to istall
__________________
1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " |
|
|
|
|
01-02-2013, 07:23 PM
|
#6 |
|
Registered User
Join Date: Apr 2011
Location: Jackson, MS
Posts: 90
|
Re: hei in a 250 six
petronixs is very easy to install, after i installed mine i just had to adjust the timing slightly. Comes with instructions
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
