IN 1967 Chevy Bare Cab W/ Title Large Back Window and A/C - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 10-04-2012, 09:20 PM

Quote:

Originally Posted by ultrahd4me

Payment sent. Thanks again Todd. Also let me know if you end up coming to Nashville to the swap meet.

Payment received, I will try to have it in the mail tomorrow. Thanks

If you hear of any other swap meets keep me in mind and I will let you know if I come down that way to any. The one you told me about sounds possible. I will be coming thru that area around New Years because I am going down the Huntsville, AL for New Years Eve.

**Todd68Chevy** · 10-05-2012, 02:05 PM

Quote:

Originally Posted by ultrahd4me

That will work. Sending payment shortly.
Thanks

It is in the mail. Thanks

ultrahd4me · 10-13-2012, 11:11 AM

Package arrived safe and sound. Thanks Todd

**Todd68Chevy** · 10-13-2012, 08:18 PM

Quote:

Originally Posted by ultrahd4me

Package arrived safe and sound. Thanks Todd

Great to hear, Thanks

Pmarti69 · 12-24-2012, 09:42 PM

Todd,

I see your cab has what I am looking for. Here my picture of the panel I m looking. Let me know what your asking price and shipping to 77345 (pending).

Thanks Paul

**Todd68Chevy** · 12-24-2012, 10:09 PM

Quote:

Originally Posted by Pmarti69

Todd,

I see your cab has what I am looking for. Here my picture of the panel I m looking. Let me know what your asking price and shipping to 77345 (pending).

Thanks Paul

That part of this cab is already gone but let me check my other cabs and I will let you know as soon as I can but it is supposed to start snowing so it might be a little while. Thanks

Pmarti69 · 12-25-2012, 06:18 PM

Quote:

Originally Posted by Todd68Chevy

That part of this cab is already gone but let me check my other cabs and I will let you know as soon as I can but it is supposed to start snowing so it might be a little while. Thanks

Ok thanks. Just when you have time.

Thanks Paul
Posted via Mobile Device

Red Tractors · 12-25-2012, 09:55 PM

Todd,

Sent you a PM earlier, let me know when you have a chance.

**Todd68Chevy** · 12-25-2012, 10:04 PM

Quote:

Originally Posted by Red Tractors

Todd,

Sent you a PM earlier, let me know when you have a chance.

I have some trucks that are still together but they all need work. I sure I have some with a good roof but the floors would be the main problem. There is a snow storm coming thru tonight and might get up to 10 inches and blizard conditions tomorrow so it will be a little while before I can recheck what I have. I really dought I have anything worth the drive. I went to college in Lima and it was a 4 1/2 hour drive. I will let you know. Thanks

Red Tractors · 12-25-2012, 10:17 PM

Thanks Todd,

When you have a chance, stay warm and no hurry.

I'm not worried about the drive, having no luck locally. (My "Parts truck" became another project.)

Thanks again.

Pmarti69 · 12-26-2012, 09:32 PM

Thanks Todd for your help, found a member that has the cab part I need. If you have any rear wheel well I could use those

budman k20 · 12-27-2012, 11:02 AM

Do you still have the firewall section? I'm looking for the AC section of the firewall to convert my non AC cab.

**Todd68Chevy** · 12-27-2012, 06:24 PM

Quote:

Originally Posted by Pmarti69

Thanks Todd for your help, found a member that has the cab part I need. If you have any rear wheel well I could use those

Good to hear. The only good wheel tubs I have are in a nice bed that I have for sale. I will let you know on the other items. Thanks

Quote:

Originally Posted by budman k20

Do you still have the firewall section? I'm looking for the AC section of the firewall to convert my non AC cab.

I had another member interested in it thru a WTB ad but I think he is passing so I do not think this one is sold. It will be this weekend before I can do anything with it. Thanks

**Todd68Chevy** · 12-30-2012, 11:00 PM

Quote:

Originally Posted by budman k20

Do you still have the firewall section? I'm looking for the AC section of the firewall to convert my non AC cab.

Here is what I cut out. I think it covers all the holes needed for the a/c system. I do not know how much you will use but the edge beside where the blower motor sits is poor. I tried to picture but it did not turn out good. I would take $25.00 plus shipping for the part pictured. I need a zip code to figure a shipping quote. Thanks

budman k20 · 01-02-2013, 06:36 PM

Sorry for the later relpy. Shiping to 55112. I will take it if the shipping isnt crazy high

**Todd68Chevy** · 01-02-2013, 08:13 PM

Quote:

Originally Posted by budman k20

Sorry for the later relpy. Shiping to 55112. I will take it if the shipping isnt crazy high

I can go $40.00 including shipping USPS Parcel Post or $53.00 shipped USPS Priority Mail. Thanks

budman k20 · 01-03-2013, 08:45 AM

PM sent with payment and shipping info

**Todd68Chevy** · 01-05-2013, 08:26 PM

Quote:

Originally Posted by budman k20

PM sent with payment and shipping info

It was in the mail yesterday. Thanks

10-13-2012, 11:11 AM	#53
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Package arrived safe and sound. Thanks Todd

12-24-2012, 09:42 PM	#55
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Todd, I see your cab has what I am looking for. Here my picture of the panel I m looking. Let me know what your asking price and shipping to 77345 (pending). Thanks Paul Attached Images __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit

12-25-2012, 09:55 PM	#58
Red Tractors Registered User Join Date: Oct 2012 Location: Northern OH Posts: 72	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Todd, Sent you a PM earlier, let me know when you have a chance. __________________ I still have a few more stupid questions left to be asked. '72 C-10 LWB step side "Old Red" '71 C-10 Cheyenne "Blue"

12-25-2012, 10:17 PM	#60
Red Tractors Registered User Join Date: Oct 2012 Location: Northern OH Posts: 72	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Thanks Todd, When you have a chance, stay warm and no hurry. I'm not worried about the drive, having no luck locally. (My "Parts truck" became another project.) Thanks again. __________________ I still have a few more stupid questions left to be asked. '72 C-10 LWB step side "Old Red" '71 C-10 Cheyenne "Blue"

12-26-2012, 09:32 PM	#61
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Thanks Todd for your help, found a member that has the cab part I need. If you have any rear wheel well I could use those __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit

12-27-2012, 11:02 AM	#62
budman k20 1972 K20 Join Date: Apr 2008 Location: Greenfield MN Posts: 360	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Do you still have the firewall section? I'm looking for the AC section of the firewall to convert my non AC cab.

01-02-2013, 06:36 PM	#65
budman k20 1972 K20 Join Date: Apr 2008 Location: Greenfield MN Posts: 360	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Sorry for the later relpy. Shiping to 55112. I will take it if the shipping isnt crazy high

01-03-2013, 08:45 AM	#67
budman k20 1972 K20 Join Date: Apr 2008 Location: Greenfield MN Posts: 360	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C PM sent with payment and shipping info

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.