s10 T5 yoke question...

[erock805]

So just about have my step dads up and rolling. Just need a drive shaft. I put in a small block and a s10 5 spd. I am on the hunt for the right one. It looks even the s10 one will fit. I pulled one from a short bed square, automatic, and it seemed that the yoke was different. Looked like a smaller spline and looked like one spline was missing (not shaved off but factory).

I have a 26 spline coming out of the trans...are there a bunch of different options with s10 yokes? I am pretty sure that the s10 came out of a square. Want to drive this thing around the block...

[jayoldschool]

I believe the T5 should use the same yoke as the Powerglide/Th350/Th700R4/Th200-4R. It would be different than the TH400.

[CRGRS 66]

couple of threads for you to look at, pretty comprehensive swap information, I personally have a camaro 5 speed with S10 tail shaft sitting in the garage waiting to be installed

http://67-72chevytrucks.com/vboard/s...d.php?t=482069

http://67-72chevytrucks.com/vboard/s...d.php?t=313954

[erock805]

Yup looked through those. Didnt see if they were the same...So I thought I would post up.

They have a couple of the round body s10s with a stick...just no squares.

[erock805]

Originally Posted by jayoldschool

I believe the T5 should use the same yoke as the Powerglide/Th350/Th700R4/Th200-4R. It would be different than the TH400.

that should give me more choices... I will check out some full size trucks. thanks

[erock805]

okay. so I checked around and went back to the yard. The round body style s10 yoke will work as long as its from a Stick car.

Need to shortin it about 3 "s but it shoud do nicely.

[wayno]

Thanks for sharing your finding - this is on my list of things to do.