Wiring woes, manual tranny wiring to automatic

[ray_mcavoy]

Yes, it should be pretty much plug and play ... so long as the wires are long enough to reach to the auto trans neutral safety switch and I think they are.

For the clutch/neutral safety start switch you're going to be looking for a pair of fairly heavy gauge wires (yellow and purple) that go into a somewhat square shaped plug. And for the reverse lighs you're going to be looking for a pair of lighter gauge wires (dark blue and light green) that go into a rectangular shaped plug. Both of these should be located in the under-dash harness somewhere close to the steering column.