|
08-24-2008, 02:39 PM
|
#1 |
|
Registered User
Join Date: Jul 2007
Location: Elkton,Maryland
Posts: 7
|
250 cid oil change Please Help
Hello I have a 1972 c10 with a 250 I6 and a 3 speed on the column. I want to change the oil in the engine. I need to know what kind of oil and how much to use. Please Help
Last edited by flintc10; 08-24-2008 at 03:25 PM. |
|
|
|
08-24-2008, 05:00 PM
|
#2 |
|
Junior Member
Join Date: Dec 2006
Location: Southeast Missouri
Posts: 2,436
|
Re: 250 cid oil change
I use a good quality 10-40 w oil, but 10-30 w is also recommended by the manuafacturer.
I replace the filter and put in 4 quarts and start the engine and run it for a few minutes. A few minutes after the engine is turned off, then I check the level and add to full. I think when you use the long oil filter the capacity of the engine and filter is 5 quarts for a 250 l6. Danny
__________________
'67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E. |
|
|
|
|
08-24-2008, 08:36 PM
|
#3 |
|
State of Confusion!
  
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,090
|
Re: 250 cid oil change
Yep 5 quarts. I used 20-50 in mine, but since it never gets cold enough down here it was good, Up your way I would use a 10-40.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
|
08-24-2008, 09:01 PM
|
#4 |
|
Texas Big Wig
Join Date: Jan 2007
Location: Mineola, Texas
Posts: 5,620
|
Re: 250 cid oil change
You know you have a good engine when the anti-freeze... I mean "oil" come out nice & green
  NOT !!! |
|
|
|
|
08-24-2008, 09:01 PM
|
#5 |
|
Active Member
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: 250 cid oil change
Here in Texas, I used to always use 30 weight on all my vehicles -summer and winter. Now it's hard to find straight 30 weight so I use the 10/30 in summer and 10/40 in the winter. I use 5 quarts with filter change every
3000 miles. |
|
|
|
|
08-26-2008, 02:09 AM
|
#6 |
|
Registered User
Join Date: Feb 2008
Location: Johnson City Tennessee
Posts: 1,191
|
Re: 250 cid oil change
castrol gtx 10w-40 highmileage is the best on the markrt
__________________
Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546  Chevy Trucks the longest lasting most dependable trucks on the road
|
|
|
|
|
08-26-2008, 02:27 AM
|
#7 |
|
Registered User
Join Date: Aug 2006
Location: Bakersfield,CA
Posts: 7,893
|
Re: 250 cid oil change
valvoline racing vr1 20w50
__________________
-steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME |
|
|
|
|
01-26-2013, 10:53 PM
|
#8 |
|
Registered User
Join Date: May 2009
Location: Gonzales, LA
Posts: 779
|
Re: 250 cid oil change
Holy crap, I used a 5.28 quart jug fired her up and killed every mosquito in town. Smoked like a demon and had oil dripping out the tailpipe. Thought it wa a straight 5 quart jug but apparently the .28 quart over makes a big difference. At least I hope that's it!
Note....... Yes I know this thread is from 08, but like everyone always says, I was using the search Button, lol
__________________
1972 Pale Yella 2WD Blazer ..... 350HO/700R4.... '68 Clipped 1970 Original Paint SWB Farm Truck ..... 5.3/4L80.... 2x HRPT Participant |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
