FL PorterBuilt ECE 2 1/2" dropped spindles - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 01-20-2013, 10:32 AM

I will include new left and right 63-70 upper and lower ball joints, plus nice dust shields for $315 shipped.

**Hart_Rod** · 01-23-2013, 09:17 AM

bump

oldblue1968chevy · 01-23-2013, 01:07 PM

So these wont work with stock tie rod ends? Im abit confused here...

Would they fit a 69 crossmember with OEM componenets?

**Hart_Rod** · 01-23-2013, 01:29 PM

Quote:

Originally Posted by oldblue1968chevy

So these wont work with stock tie rod ends? Im abit confused here...

Would they fit a 69 crossmember with OEM componenets?

No, they were drilled out to 5/8th non tapered hole so you can bolt the heym joints to them.

oldblue1968chevy · 01-23-2013, 04:02 PM

Ah, rats

**Hart_Rod** · 01-26-2013, 09:30 AM

Quote:

Originally Posted by oldblue1968chevy

Ah, rats

, Saturday bump
Posted via Mobile Device

STOCKISH · 01-26-2013, 11:51 AM

You can buy heim joints and adjusters and use these on any truck, even without a rack and pinion steering setup. The pic is from this post.
http://67-72chevytrucks.com/vboard/s...d.php?t=335328

**lolife99** · 01-26-2013, 12:11 PM

Quote:

Originally Posted by 1972SuperCheyenne

You can buy heim joints and adjusters and use these on any truck, even without a rack and pinion steering setup. The pic is from this post.
http://67-72chevytrucks.com/vboard/s...d.php?t=335328

Correct.
But you would want the heim on top of the spindle tie rod location,... with a stock crossmember.

STOCKISH · 01-26-2013, 04:25 PM

^^True^^ I was just trying to show people so they wouldnt be afraid to purchase these. I would love to have them if I had the cash.

**Hart_Rod** · 01-29-2013, 10:08 AM

Thanks for the info guys. Any offers?

Tshort1 · 01-29-2013, 11:42 AM

Ok With the info above about the Heim Joints I am intrested again. I would like the Spindles and ball joints but dont need the dust sheilds. How about 275 Shipped for the ball joints and drop spindles?

**Hart_Rod** · 01-29-2013, 11:53 AM

Quote:

Originally Posted by Tshort1

Ok With the info above about the Heim Joints I am intrested again. I would like the Spindles and ball joints but dont need the dust sheilds. How about 275 Shipped for the ball joints and drop spindles?

Sounds good. PM information.

R/

**lolife99** · 02-02-2013, 12:39 PM

ttt
for a good deal,...

**Hart_Rod** · 02-02-2013, 12:42 PM

Quote:

Originally Posted by lolife99

ttt
for a good deal,...

Keith - TSHORT1 bought them, but thanks for all the information and the assist on the sale!!!

STOCKISH · 02-02-2013, 12:46 PM

Glad they sold, I was thinking about them really hard! LOL

**lolife99** · 02-02-2013, 12:48 PM

Quote:

Originally Posted by Hart_Rod

Keith - TSHORT1 bought them, but thanks for all the information and the assist on the sale!!!

Good deal.
Sorry about all the "cluttered up comments", in your thread.
I tried to get that stuff eliminated as soon as possible.

Tshort1 · 02-06-2013, 06:06 PM

Got the Spindles and ball joints today. Thanks and you did a great job packing them.

01-20-2013, 10:32 AM	#26
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: PorterBuilt ECE 2 1/2" dropped spindles I will include new left and right 63-70 upper and lower ball joints, plus nice dust shields for $315 shipped. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 01-23-2013 at 09:17 AM.

01-23-2013, 09:17 AM	#27
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: PorterBuilt ECE 2 1/2" dropped spindles bump __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-23-2013, 01:07 PM	#28
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: PorterBuilt ECE 2 1/2" dropped spindles So these wont work with stock tie rod ends? Im abit confused here... Would they fit a 69 crossmember with OEM componenets? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-23-2013, 04:02 PM	#30
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: PorterBuilt ECE 2 1/2" dropped spindles Ah, rats __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-26-2013, 11:51 AM	#32
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: PorterBuilt ECE 2 1/2" dropped spindles You can buy heim joints and adjusters and use these on any truck, even without a rack and pinion steering setup. The pic is from this post. http://67-72chevytrucks.com/vboard/s...d.php?t=335328 Attached Images __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-26-2013, 04:25 PM	#34
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: PorterBuilt ECE 2 1/2" dropped spindles ^^True^^ I was just trying to show people so they wouldnt be afraid to purchase these. I would love to have them if I had the cash. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-29-2013, 10:08 AM	#35
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: PorterBuilt ECE 2 1/2" dropped spindles Thanks for the info guys. Any offers? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-29-2013, 11:42 AM	#36
Tshort1 Registered User Join Date: Feb 2012 Location: Pikeville, NC Posts: 144	Re: PorterBuilt ECE 2 1/2" dropped spindles Ok With the info above about the Heim Joints I am intrested again. I would like the Spindles and ball joints but dont need the dust sheilds. How about 275 Shipped for the ball joints and drop spindles?

02-02-2013, 12:39 PM	#38
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: PorterBuilt ECE 2 1/2" dropped spindles ttt for a good deal,... __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-02-2013, 12:46 PM	#40
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: PorterBuilt ECE 2 1/2" dropped spindles Glad they sold, I was thinking about them really hard! LOL __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-06-2013, 06:06 PM	#42
Tshort1 Registered User Join Date: Feb 2012 Location: Pikeville, NC Posts: 144	Re: PorterBuilt ECE 2 1/2" dropped spindles Got the Spindles and ball joints today. Thanks and you did a great job packing them.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.