![]() |
![]() |
#1 |
Registered User
Join Date: Mar 2001
Location: RADFORD, VA
Posts: 2,651
|
Brakes ((help)
Ok Iv'e been working on rebuilding my brakes and looks like I'm missing something.There drum brakes on front and where the rubber line bolts from the wheel cyclinder to looks like a junction block that also goes to the passenger side on the inside of frame looks like there's some type of hollow bolt missing goes through the junction block and bolts to driver side rubber line.If you know what i'm talking about what's the name for the part so i can try to get one from a donor truck at junk(fun) yard.Thanks for any help.Randy
__________________
1964 BBC 402 4x4 ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,922
|
I'm not sure of the part, since I don't have my truck here at the house, but it sounds like you're describing a banjo bolt, a bolt that's hollow through the middle and has at least one opening near the head to allow a fluid to pass through.
__________________
I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson |
![]() |
![]() |
![]() |
#3 |
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
I THINK THAT ,,,THAT HOLE IS WHERE THE BOLT GOES TO BOLT IT TO THE REAR END TO KEEP IT FROM FLOPPING AROUND???
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|