IN 1999 silverado ext cab part out

[1970 C10 MJW]

hey guys.. I am going to be out of work for a short period of time and could really use the money from anything you guys may buy from me, make me an offer, the worst I can do is say no, all posted prices are OBO

CHEAP I am ready to get stuff gone... I dont want this stuff to go to the scrapyard...
call, text or PM me I can send more pics... 1 574 807 4096


everything from truck is available except the engine harness and pcm, front end collision so front clip is ruined. cloth charcoal interior, dash seems good, red exterior, has third door some rust repair needs to be done to the rear fenders but the bed is nice and straight, rockers aren't too great but cab is great, will post pics later, intake, trans, torque converter, transfer case, drive shafts front and rear ext cab short bed, tail lights, steering wheel is black and air bag is good, let me know what you need!!

[1970 C10 MJW]

Steering gear box (drove truck for about 10 minutes works good) $50 +shipping
Sway bar (in good shape) $50+ shipping
steering linkages (they are good, but taking them off may damage boots...) $50+ shipping for all the steering linkages
front differential $100 + shipping
CV axles $25 each+ shipping
front hub assemblies $20 each + shipping
front tow hooks $20+ shipping (looks like they have never been used)
brake booster/master cylinder (both working) $40 + shipping
seats, not perfect but still decent... $70+ shipping
Gauge cluster $35 + shipping
factory radio (tape player not cd) $25
HVAC (has A/C and recirculate buttons) $50 + shipping
small overhead console (has the lights and a small tray) SOLD
visors 25 each + shipping or $40 for the pair i will cover shipping
front door panels $60 for both (in good shape no rips or burn marks)
glove box door $ 25 + shipping
floor shift 4x4 assembly $25 +shipping
cup holder sold
headlight switch $20+ shipping
if there is anything else you are looking for let me know!!! lots of parts still on this truck

[1970 C10 MJW]

exhaust manifolds $40 + shipping
catted y $125 + shipping
full factory exhaust system (stainless from what I can tell) no O2s $75 local pickup or greyhound (on your dollar)
rear axle is a disc axle SOLD
tailgate SOLD
rear bumper $50 local pickup or greyhound (on your dollar)
front bumper $25 (small dents) local pickup or greyhound (on your dollar)
truck intake $40 (no throttle body) +shipping
EGR $30 shipped (complete)
transfer case (i tested and all positions are working) $115+ shipping

[Ironhorse]

Interested in driver and passenger sunvisors if both mirrors and doors intact and working. Cloth in good condition? Hood release inside handle, just need handle only. Prices for sunvisors and inside release handle? Possibly interested in driver and passenger inside door handles if good condition. Shipping to 67152 zip.

[1970 C10 MJW]

ironhorse, the passenger side door is crunched up pretty good exterior wise mirror is ruined, handles in and out are still good, inner door skin i will have to check its condition but i believe its fine (not at home atm), drivers door is fine, but mirror appears to be damaged/loose (wobles some) im unsure of visor condition, i will post pics of visors tonight when I get home

[1970 C10 MJW]

these are the pics of the intake and cover, all sensors and injectors go with it, but i am keeping my throttle body (with the tps and iac), tranny, 862 heads are for sale too, egr valve and associated hose and mount too, these seats are free with local pickup, they arent pefect but better then nothing, they also have covers that fit them ok that i will give with, and a center console. make me an offer on this stuff plz and thanks
also on one of the seats you will notice there is a steering wheel there, its for a 97 chevy, has a good air bag, will fit other models?
ironhorse, sorry i didn't post pics of what youre looking for these were taken yesterday

[Ironhorse]

Sorry, after reading my post guess I wasn't very clear about it. Am interested in the driver and passenger visors if the cloth coverings are good, no tears, elastic bands are good and the mirrors intact, wkorking lights and the VISOR doors are good with no broken tabs. Nor referring to the vehicle doors. Poor wording on my first post.

Am interested in the driver and pass. inner door handles? What color, tan or gray/charcoal, need tan pair. How about the inner hood release handle, mine is broken. Cable works, just need a handle.

[1970 C10 MJW]

will check when i get home sorry unprepared lol!

[1970 C10 MJW]

drivers side then pass side visors, let me know what you think

[1970 C10 MJW]

driver then pass side door handles, sorry the pics are rotated idk how to fix that

[1970 C10 MJW]

im sorry i forgot to check the hood release handle, will check that tonight

[Ironhorse]

Hate to say it but the visors and the door handles both are differant than my
'99 Tahoe. Thought '99 Silverado and '99 Tahoe would be the same? Are your outside door handles somewhat square in design or are they the newer oval style? My outside handles are more square in design. Maybe they changed the truck body to newer style before they changed the Tahoe and Suburbans? Now am wondering about the hood release handle? Still interested in it but wondering if it also is differant?

[1970 C10 MJW]

do you have the 88-98 c/k body style? i know that body style was still available til 01 in the pickups

[Ironhorse]

The '99 Tahoe I have has been referred to as "the old body style", best I can tell you. In 2000 Chevrolet changed the Tahoe and Suburban to newer style with the oval door handles and such. My youngest son has a '99 Z71 4x4 and it is the same as my Tahoe. He had to get a new a/c blower motor for it and the first one they gave him at the parts store would not fit. It was for a '99 Silverado, went back and told the parts counter guy he had a '99 Z71 and they gave him the correct motor. Guess Silverado trucks had the newer body style so don't look like your visors and door handles will work. Darn it, LOL. Thanks anyway.

[1970 C10 MJW]

oh its cool man, thanks for the interest in it, and btw i have a 97 and my visors are pretty rough and my drivers door handle broke.. lol

[1970 C10 MJW]

ttt come on guys im wanting to get this truck sold help me out, make me an offer!!

[1970 C10 MJW]

bump

[1970 C10 MJW]

ttt noone wants this stuff??????

[Mparker]

How much for the back driverside glass. And pics.
Posted via Mobile Device

[1970 C10 MJW]

i will take a pic of it tonight, in and out, I also PMed you

[1970 C10 MJW]

bump

[1970 C10 MJW]

bump rear axle and tailgate sold, mparker I am sorry for taking so long, life gets hectic around here.. I will get a pic for you asap

[1970 C10 MJW]

sorry for the delay... heres the pics of the rear window drive side... second pic is the pass side... third pic will be right hang on one second

[1970 C10 MJW]

waiting for the pic to email to myself lol

[1970 C10 MJW]

drivers side from inside the truck