35 BFG AT's for sale or trade - The 1947 - Present Chevrolet & GMC Truck Message Board Network

trukkers69 · 10-28-2003, 08:10 PM

Looking to sell or trade my 35 BFG at's . 2 have less than 300 miles 2 are old style w/ about 70% left. They are mounted on 15x10 6 hole chrome sawblade rims w/3.5 bs. . I am looking for some 33 or 34 in. swampers , preferr no wider than 12.50 . asking $450. no pics yet will get some as soon as possible.

thanks Jeff

**JIMs70GMC** · 10-29-2003, 06:51 AM

Don't need the tires but would suggest getting the radial swampers. I have the 33" bias ply load range D tires on my truck. They were hard to balance and wander, but I only drive 4 miles to work and I do work my truck so they work for me.

trukkers69 · 10-29-2003, 07:19 PM

Bias or radial ,dosen't really matter . There going on my most recent project. Gonna put the ol' ralleys back on before I turn the k10 to a c10.

mkmiller1 · 10-29-2003, 07:37 PM

I'm interested. Where in Mississippi are you located? Looking for pics.
Thanks,
Matthew

trukkers69 · 10-29-2003, 09:22 PM

Central part of state, about 65 miles east /north east of Jackson. Will try to get pics this weekend. Jeff

trukkers69 · 11-09-2003, 01:16 AM

Bumpious Maximus

10-28-2003, 08:10 PM	#1
trukkers69 Registered User Join Date: Jan 2003 Location: Sebastopol Miss. Posts: 169	35 BFG AT's for sale or trade Looking to sell or trade my 35 BFG at's . 2 have less than 300 miles 2 are old style w/ about 70% left. They are mounted on 15x10 6 hole chrome sawblade rims w/3.5 bs. . I am looking for some 33 or 34 in. swampers , preferr no wider than 12.50 . asking $450. no pics yet will get some as soon as possible. thanks Jeff __________________ EXPERIMENTAL STAGES OF SANITY _____________________________ Run whatcha brung, and hope you brung enuff

10-29-2003, 06:51 AM	#2
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Don't need the tires but would suggest getting the radial swampers. I have the 33" bias ply load range D tires on my truck. They were hard to balance and wander, but I only drive 4 miles to work and I do work my truck so they work for me. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

10-29-2003, 07:19 PM	#3
trukkers69 Registered User Join Date: Jan 2003 Location: Sebastopol Miss. Posts: 169	Bias or radial ,dosen't really matter . There going on my most recent project. Gonna put the ol' ralleys back on before I turn the k10 to a c10. __________________ EXPERIMENTAL STAGES OF SANITY _____________________________ Run whatcha brung, and hope you brung enuff

10-29-2003, 07:37 PM	#4
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	I'm interested. Where in Mississippi are you located? Looking for pics. Thanks, Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

10-29-2003, 09:22 PM	#5
trukkers69 Registered User Join Date: Jan 2003 Location: Sebastopol Miss. Posts: 169	Central part of state, about 65 miles east /north east of Jackson. Will try to get pics this weekend. Jeff __________________ EXPERIMENTAL STAGES OF SANITY _____________________________ Run whatcha brung, and hope you brung enuff

11-09-2003, 01:16 AM	#6
trukkers69 Registered User Join Date: Jan 2003 Location: Sebastopol Miss. Posts: 169	Bumpious Maximus __________________ EXPERIMENTAL STAGES OF SANITY _____________________________ Run whatcha brung, and hope you brung enuff

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.