|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-27-2013, 10:36 PM
|
#1 |
|
Registered User
 Join Date: Oct 2012
Location: North Virginia
Posts: 149
|
Anyone recognize these wheels
Im trying to find a center cap that works with them and clears the c20 rear hub, they have no stamp on them Im thinking they were oem options
thanks |
|
|
|
02-27-2013, 10:40 PM
|
#2 |
|
Registered User
Join Date: Sep 2012
Location: Lawton Oklahoma
Posts: 308
|
Re: Anyone recognize these wheels
You might get the tire removed and check the wheel. They have model numbers on them!
Or you could measure the inside diameter and order some that will match that dimension! Good luck! Posted via Mobile Device
__________________
People who make excuses didn't want to do it in the first place!  http://s1326.photobucket.com/albums/...cpZZ1QQtppZZ16 |
|
|
|
|
02-28-2013, 01:16 AM
|
#3 |
|
Registered User
Join Date: Oct 2006
Location: San Jose NOR*CAL
Posts: 3,080
|
Re: Anyone recognize these wheels
looks like a pacer 162M aluminum mod. I'm pretty sure a push through cap will work. Were are you located?
__________________
1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " |
|
|
|
|
02-28-2013, 01:46 AM
|
#4 |
|
Registered User
Join Date: May 2012
Location: Cypress, TX
Posts: 163
|
Re: Anyone recognize these wheels
def not a factory wheel. most aftermarket wheels do not have the manufacturer's name or part number on the back of the wheel and just about every wheel manufacturer has made a style similar to that over the years. looks like it should take a push thru cap like mentioned. the wheel is likely a 130mm gore which is pretty typical for 8 lug wheels. wheel stores hate screwing with center caps, so your best bet is to call around to your local wheel shops and ask for an 8 lug push thru short cap in stock, then take a wheel off your truck up there and slide the cap thru to see if it fits. i mention the short cap because you do not have a long hub that sticks thru the wheel and a long cap would look crappy.
Posted via Mobile Device |
|
|
|
|
02-28-2013, 07:28 AM
|
#5 |
|
Registered User
Join Date: Oct 2012
Location: North Virginia
Posts: 149
|
Re: Anyone recognize these wheels
Well I wanted to run them on my 66c20 so there is a big ass hub in the rear
Last edited by joeydirt; 02-28-2013 at 07:47 AM. Reason: typo I own a c20 |
|
|
|
|
02-28-2013, 07:45 AM
|
#6 |
|
Registered User
Join Date: Oct 2010
Location: Independence,KS
Posts: 1,477
|
Re: Anyone recognize these wheels
there's too many lug nut holes for a C-10
|
|
|
|
|
02-28-2013, 07:47 AM
|
#7 | |
|
Registered User
Join Date: Oct 2012
Location: North Virginia
Posts: 149
|
Re: Anyone recognize these wheels
Quote:
|
|
|
|
|
|
02-28-2013, 11:26 AM
|
#9 |
|
Registered User
Join Date: Oct 2006
Location: San Jose NOR*CAL
Posts: 3,080
|
Re: Anyone recognize these wheels
Just go to your local tire/ wheel store and ask for 8 lug tall push thru caps
5.11" diameter and 6.33" tall. I asked were you were located to see if I could recomemd a shop..... let me know
__________________
1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " |
|
|
|
|
02-28-2013, 12:06 PM
|
#10 |
|
Registered User
Join Date: Nov 2010
Location: Lolo montana
Posts: 361
|
Re: Anyone recognize these wheels
there a outlaw II design.any aftermarket cap will fit them.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
