|
11-14-2003, 08:13 PM
|
#1 |
|
Account Suspended
Join Date: Jun 2003
Posts: 139
|
Need some advice..
here's my dilemma. I have some nice Weld brand 6 lug wheels, but recently converted over to disk in the front. ( 5 lug big 3/4 )
now I want to convert over to drop spindles from the setup back to a 6 lug rotor. question 1. -> can I get 6 lug rotors with a 7/16 stud? question 2. -> Can I re-use the stock calipers if I do find the above item? Any help would be greatly appreciated - I want to get my truck looking cool again - now I feel like I should be hauling hay and screaming YEEEEEEEEE HAAAAAAAAAAAAAW and blaring country in it. (nothing against the above by the way- just prefer to do that in my '69 charger ya' know.) yeeeehaaaaaawww. plink - ( chewin' tabacco hits the floorboard) |
|
|
|
11-15-2003, 01:53 PM
|
#2 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
I would think you could get a parts guy to cross reference a set of 7/16 studs X whatever hole diameter your rotors have.If the holes are smaller any machine shop should be able to drill them to accept the 7/16 studs.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
|
11-15-2003, 08:07 PM
|
#3 |
|
Registered User
 
Join Date: Aug 2001
Location: SOMERSET KY.
Posts: 6,427
|
 ALL MY 6 LUG ROTORS ARE 7/16" STUDS ALL MY 5 LUG ROTORS ARE 1/2" STUDS OR AM I MISUNDERSTANDIG THE QUESTION?? I THINK MOST ALL THE PARTS VENDORS CARRY 6 LUG ROTORS. JOHN
__________________
junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE.  THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES//LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST |
|
|
|
|
11-15-2003, 08:40 PM
|
#4 |
|
Registered User
Join Date: Apr 2003
Location: missouri city, tx
Posts: 4,486
|
www.truckandcarshop.com has em individually i think. i dont remember right now. gmc pauls should have em. i dont know if he sells em individually though. ask one of the places that sell the 6 lug disc brake conversion kit if they will sell the rotors individually
__________________
70 longbed 496/th400/Ford 9" |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
