Parts needed to convert to power brakes

[Gigem]

OK, I am man enough to admit I was wrong!

I want to add power brakes to my 1980 stepside... Now that the 6 banger is replaced with a 350 HO, I definitely have more "go", so I need more "stop"...

Plus, now that the stiff old clutch is gone and replaced with 700R4, I definitely notice how much pedal effort is required to stop it...

So what parts do I need?

Booster
New master cylinder
Brake rod?
Proportioning valve?

The motor should be producing plenty of vacuum, not too worried about that. I want a simple, no muss no fuss install. Not trying for the cheapest, I want it to work good and be a hassle free fit and installation.

Any suggestions on parts?

Me and my right leg thank you!
Posted via Mobile Device

[BMERDOC]

Any junk yards around you have a C10 with a power set up? I'd think that'd be the easiest and cheapest set up.

[77c10]

That is what I did with mine. I went to Pull-a-part and got the booster and master cylinder. Took the master cylinder off the booster and went to the parts house and got a new one. All told, I might have $40 in my conversion.