The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-15-2013, 04:52 PM   #1
Denee007
Senior Member
 
Denee007's Avatar
 
Join Date: May 2011
Location: Cypress, Tx.
Posts: 1,504
hood latch question

Hi! I've installed my hood latch on my 59 Apache, I can push the hood down past the safety catch(the first hook), but a little reluctant to push down on it in fear I may not get it back open. How does the nub/catch on the right lower part of the latch work? If I pull the lever as to open the hood,the safety catch pulls in, then I can squeeze the right lower part back in, but I don't see how the hood can down all the way cause of the right lower part of the latch! It's a new latch.
dne'

__________________
'72 Ford Bronco project(July 17 2021-?)
https://67-72chevytrucks.com/vboard/...d.php?t=828015
59 Apache (sold 6-25-2021)
67 Ford Mustang (re-restored after Harvey)
1968 Jeep Cj5 (2-8-2020 to present)
1992 Jeep Yj (8-17-20 to present) (Jurassic build)

www.Classiccarsandtools.com
Denee007 is offline   Reply With Quote
Old 04-15-2013, 06:28 PM   #2
buggy5872
Senior Member
 
buggy5872's Avatar
 
Join Date: Jun 2011
Location: North Beaver TWP PA
Posts: 833
Re: hood latch question

I just went and looked at mine. Looks the same as yours only not so shiny....not sure how it works but mine is the same.
__________________
___________________________
1959 Apache Short Fleetside,
1959 Apache NAPCO Long Stepside,
1957 3100 with 59 fleetside bed
1957 5700 LCF Crew Cab "Big Bertha",1959 GMC F370
1958 GMC 600, 1946 Chevy, 1959 Viking 60 LCF
1974 Elcamino SS, 1979 6500 GMC Tilt Bed Wrecker
Big Bertha Build
buggy5872 is offline   Reply With Quote
Old 04-15-2013, 06:45 PM   #3
Denee007
Senior Member
 
Denee007's Avatar
 
Join Date: May 2011
Location: Cypress, Tx.
Posts: 1,504
Re: hood latch question

Thank you~ that gave me confidence to shut the hood like one would~ it closed tightly and opened very well! I'm happy! The original hood latch~ I closed the hood and I didn't think I'd ever get the hood opened~ luckily it didn't have a grill at the time and I could work from below to get it open.
again, thanks!
dne'

Quote:
Originally Posted by buggy5872 View Post
I just went and looked at mine. Looks the same as yours only not so shiny....not sure how it works but mine is the same.
__________________
'72 Ford Bronco project(July 17 2021-?)
https://67-72chevytrucks.com/vboard/...d.php?t=828015
59 Apache (sold 6-25-2021)
67 Ford Mustang (re-restored after Harvey)
1968 Jeep Cj5 (2-8-2020 to present)
1992 Jeep Yj (8-17-20 to present) (Jurassic build)

www.Classiccarsandtools.com
Denee007 is offline   Reply With Quote
Old 04-16-2013, 08:21 PM   #4
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: hood latch question

the hook on top is your safety latch
the part on the bottom gets pushed down
which pops the latch out
yours is installed correctly

slam it

__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 04-16-2013, 08:38 PM   #5
Denee007
Senior Member
 
Denee007's Avatar
 
Join Date: May 2011
Location: Cypress, Tx.
Posts: 1,504
Re: hood latch question

Thanks Ogre! It's is nice to have a working hood latch! There's just that incredible fear of when closing the hood for the first time~ Will it open again? yikes! KInd of like the doors on the cab~ you shut it, then it feels just for a nano-second like it's not going to open, but then it does and a sigh of relief is felt!
__________________
'72 Ford Bronco project(July 17 2021-?)
https://67-72chevytrucks.com/vboard/...d.php?t=828015
59 Apache (sold 6-25-2021)
67 Ford Mustang (re-restored after Harvey)
1968 Jeep Cj5 (2-8-2020 to present)
1992 Jeep Yj (8-17-20 to present) (Jurassic build)

www.Classiccarsandtools.com
Denee007 is offline   Reply With Quote
Old 04-16-2013, 09:17 PM   #6
Clarance J
Registered User
 
Clarance J's Avatar
 
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 473
Re: hood latch question

Denee007, I know that its only a latch but in the picture it almost looks like a piece of art. Its true that its the simple things that make you happy, especially when they work the way they are supposed too. One more part of the puzzle in place. A Yahoo to you.
__________________
You have to have patiences or you'll be one.
Clarance J is offline   Reply With Quote
Old 04-16-2013, 09:32 PM   #7
Denee007
Senior Member
 
Denee007's Avatar
 
Join Date: May 2011
Location: Cypress, Tx.
Posts: 1,504
Re: hood latch question

Yes Clarance J, yes, it is the simple things is true! When things go as they're supposed to~ rare! But there is no manual for what we do, there is a go by my seat kind of plan I'd say, and it all comes together in the end~ one day we're just left driving it around~ thinking, "what next?" All the challenges are finished and recorded, but the actual "fun" is a build thread seeing a project come to life and friends sharing the experience! Oh gosh, I'm going to cry!
__________________
'72 Ford Bronco project(July 17 2021-?)
https://67-72chevytrucks.com/vboard/...d.php?t=828015
59 Apache (sold 6-25-2021)
67 Ford Mustang (re-restored after Harvey)
1968 Jeep Cj5 (2-8-2020 to present)
1992 Jeep Yj (8-17-20 to present) (Jurassic build)

www.Classiccarsandtools.com
Denee007 is offline   Reply With Quote
Old 04-16-2013, 09:51 PM   #8
Clarance J
Registered User
 
Clarance J's Avatar
 
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 473
Re: hood latch question

Don't cry Denee, You'll spot your upholstery. Yep, that's why we all do what we do.
__________________
You have to have patiences or you'll be one.
Clarance J is offline   Reply With Quote
Old 04-17-2013, 01:07 PM   #9
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: hood latch question

Quote:
Originally Posted by Denee007 View Post
Oh gosh, I'm going to cry!
i knew this forum would go to heck when they allowed women on it
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 04-18-2013, 11:06 AM   #10
Russell Ashley
Registered User
 
Russell Ashley's Avatar
 
Join Date: May 2010
Location: Lawrenceville, Ga
Posts: 2,644
Re: hood latch question

Sometimes I feel like crying too when I look at the "total" cell on my excell spreadsheet.
Russell Ashley is offline   Reply With Quote
Old 04-18-2013, 11:51 AM   #11
Denee007
Senior Member
 
Denee007's Avatar
 
Join Date: May 2011
Location: Cypress, Tx.
Posts: 1,504
Re: hood latch question

I really never have any intentions to add up the things I've bought in my truck folder where I keep all my receipts! And even more depressing, the fateful day that we will sell it? I can see it now, listing what we have in our trucks, only to give it away! I say I will never sell my projects, but some day~ Or what's worse to hear come out of a buyers mouth, "what's the least you'll take?" I have the most difficult time getting someone to come down on a price, the words just won't come out of my mouth!

And as to what Ogre said, "Girls just want to have fu-un!"

Quote:
Originally Posted by Russell Ashley View Post
Sometimes I feel like crying too when I look at the "total" cell on my excell spreadsheet.
__________________
'72 Ford Bronco project(July 17 2021-?)
https://67-72chevytrucks.com/vboard/...d.php?t=828015
59 Apache (sold 6-25-2021)
67 Ford Mustang (re-restored after Harvey)
1968 Jeep Cj5 (2-8-2020 to present)
1992 Jeep Yj (8-17-20 to present) (Jurassic build)

www.Classiccarsandtools.com
Denee007 is offline   Reply With Quote
Old 04-18-2013, 12:36 PM   #12
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,498
Re: hood latch question

Yuppers, it said "save the receipts in a folder" I don't remember the "add it up" part. That would make many of us sit down and cry. It sure helps later when you are asking yourself what was that part number for that part and where did I buy it though.

You make a lot of us feel like slackers for not making much truck progress while we seem to see constant progress on yours.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 04-18-2013, 01:31 PM   #13
Denee007
Senior Member
 
Denee007's Avatar
 
Join Date: May 2011
Location: Cypress, Tx.
Posts: 1,504
Re: hood latch question

But most everyone here does extraordinary work, plus I didn't have to paint my truck and do a whole bunch of metal repair, and I didn't remove the body parts either, or complete frame resto, so I had a heck of a jump start, plus I'm home most all of the time, so really, I should have been finished long ago besides if when finished, life will be dull!

Quote:
Originally Posted by mr48chev View Post
Yuppers, it said "save the receipts in a folder" I don't remember the "add it up" part. That would make many of us sit down and cry. It sure helps later when you are asking yourself what was that part number for that part and where did I buy it though.

You make a lot of us feel like slackers for not making much truck progress while we seem to see constant progress on yours.
Posted via Mobile Device
__________________
'72 Ford Bronco project(July 17 2021-?)
https://67-72chevytrucks.com/vboard/...d.php?t=828015
59 Apache (sold 6-25-2021)
67 Ford Mustang (re-restored after Harvey)
1968 Jeep Cj5 (2-8-2020 to present)
1992 Jeep Yj (8-17-20 to present) (Jurassic build)

www.Classiccarsandtools.com
Denee007 is offline   Reply With Quote
Old 04-18-2013, 01:43 PM   #14
lazypineapple
Registered User
 
lazypineapple's Avatar
 
Join Date: Apr 2010
Location: Granbury ,TX
Posts: 268
Re: hood latch question

"Folder" ?
I'm using a Summit Box.


Quote:
Originally Posted by mr48chev View Post
Yuppers, it said "save the receipts in a folder" I don't remember the "add it up" part. That would make many of us sit down and cry. It sure helps later when you are asking yourself what was that part number for that part and where did I buy it though.

You make a lot of us feel like slackers for not making much truck progress while we seem to see constant progress on yours.
lazypineapple is offline   Reply With Quote
Old 04-18-2013, 01:50 PM   #15
rgunlock
Senior Member
 
rgunlock's Avatar
 
Join Date: Jul 2009
Location: Tomball, Texas
Posts: 1,592
Re: hood latch question

Quote:
Originally Posted by Denee007 View Post
But most everyone here does extraordinary work, plus I didn't have to paint my truck and do a whole bunch of metal repair, and I didn't remove the body parts either, or complete frame resto, so I had a heck of a jump start, plus I'm home most all of the time, so really, I should have been finished long ago besides if when finished, life will be dull!


Posted via Mobile Device
I remember when you bought this truck, and you've made a great deal of progress, but I've heard any number of times on this forum that these trucks are never entirely "done"
__________________
Rick

78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel
71 GMC C25 350/TH400 - Project Angie
59 Chevy SWB Stepside (next in line? Not sure now )
2001 GMC Sierra K2500
rgunlock is offline   Reply With Quote
Old 04-18-2013, 01:53 PM   #16
Russell Ashley
Registered User
 
Russell Ashley's Avatar
 
Join Date: May 2010
Location: Lawrenceville, Ga
Posts: 2,644
Re: hood latch question

I had a folder on my last truck but never did add it up, and gave the folder to the buyer. I don't think I wanted to know, LOL. When I bought this truck I started an Excel spread sheet and enter every penny I spend along with where purchased, quantity, p/n sometimes, and shipping cost. I do it even for 4-5 dollar hardware store purchases so my total is very accurate (and sometimes depressing). It definitely exceeds what I could sell my truck for, but who's counting anyway.

Warning: Keeping a spread sheet like this might not be a good idea if your wife uses your computer, LOL.
Russell Ashley is offline   Reply With Quote
Old 04-18-2013, 03:05 PM   #17
oldcouple
Registered User
 
oldcouple's Avatar
 
Join Date: Nov 2011
Location: Winlock Wa
Posts: 584
Re: hood latch question

Quote:
Originally Posted by Denee007 View Post
But most everyone here does extraordinary work, plus I didn't have to paint my truck and do a whole bunch of metal repair, and I didn't remove the body parts either, or complete frame resto, so I had a heck of a jump start, plus I'm home most all of the time, so really, I should have been finished long ago besides if when finished, life will be dull!


Posted via Mobile Device
Hmm, Fun with girls, what a novel concept, wonder if it will ever replace fun with trucks.
__________________
Retired and too busy to work.
oldcouple is offline   Reply With Quote
Old 04-19-2013, 01:46 PM   #18
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: hood latch question

Quote:
Originally Posted by Russell Ashley View Post
Warning: Keeping a spread sheet like this might not be a good idea if your wife uses your computer, LOL.
swmbo doesn't need to know what i do with her money
i have a detailed spreadsheet with manufacturer and part numbers, no cost column
i have a rough idea of how much i have in truk, which does not include all those $5 trips to hd or parts stores
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:14 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com