|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-18-2013, 02:48 PM
|
#1 |
|
Registered User
Join Date: Apr 2011
Location: Edmond, Ks
Posts: 595
|
Compressor Oil and Sighting
I just fell into a new-to-me Ironhorse compressor (see the details) and aside from a few smallish issues it's also out of oil. Or as we say it around here, 'earl.
It has a sight glass but there's no markings as to how high to fill it up. Do I just dump oil in it till its full? This is my first 'earled compressor so I'm clueless. Also, does oil brand/type matter? Can I just dump some 10w30 in it? This is kinda what the sight glass looks like 
__________________
Step by steps: Remove primer to reveal original paint Rebuild a carburetor See My Build - Cecilia!  Some people are like slinkys. Not worth much but funny as heck when pushed down stairs. |
|
|
|
04-18-2013, 07:29 PM
|
#2 |
|
Registered User
Join Date: Aug 2009
Location: S.C.
Posts: 1,593
|
Re: Compressor Oil and Sighting
It probably calls for a 30w compressor oil.
I believe when I last changed the oil in mine, I used straight 30w non-detergent. Oil level on mine is currently about 1/2-3/4 up the red dot. I have the paperwork that came with my CH, though I can't lay my hands on it now.
__________________
'86 C-30 dually, 454/tbh400 '73 K-20 350/350/205 (sold  )I'm kinda like duct tape- no real purpose, but handy to have around. |
|
|
|
|
04-19-2013, 09:27 AM
|
#3 |
|
Registered User
Join Date: Apr 2011
Location: Edmond, Ks
Posts: 595
|
Re: Compressor Oil and Sighting
If CH has the same sight, do you know your model number? I'll download a manual from their website and use it instead. The Ironhorse manual is worthless.
"Plug into a the wall. Turn unit to the on. Blow the air. Dont not mis-use." Regarding the oil, I found this that says like you did, any 30 wt non detergent will do fine. What's the difference between compressor oil and regular non-detergent oil? That doesn't include my bottle of Penzoil though, because any oil listed as SAE for gas engines IS detergent oil.
__________________
Step by steps: Remove primer to reveal original paint Rebuild a carburetor See My Build - Cecilia! Some people are like slinkys. Not worth much but funny as heck when pushed down stairs. Last edited by FetchMeAPepsi; 04-19-2013 at 09:33 AM. |
|
|
|
|
04-19-2013, 10:52 AM
|
#4 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Compressor Oil and Sighting
my compressor has similar sight glass and it is supposed to b at half way popoint of glass
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
04-22-2013, 11:08 PM
|
#5 |
|
Registered User
Join Date: Apr 2011
Location: Edmond, Ks
Posts: 595
|
Re: Compressor Oil and Sighting
Thanks Cdowns! I filled it up halfway and it ran great for over a half hour. Now I just need to repair the line from the motor to the tank
__________________
Step by steps: Remove primer to reveal original paint Rebuild a carburetor See My Build - Cecilia! Some people are like slinkys. Not worth much but funny as heck when pushed down stairs. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
