KS Getting ready for swap meet in Lawrence so here are some parts - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Cash3481** · 04-23-2013, 08:36 AM

Quote:

Originally Posted by teeitup

camtoys, I will check after work

Cash3481, Mike, no shrouds, which ring is he needing 4 speed or transfer, I think I have a 4 speed ring but no transfer ring

Thanks Randy

Thanks Randy!
No problem on the shroud... Ill do a WTB add for it.
I believe he needs the transfer rings for 2 trucks.
If you get a couple rings let me know. What do they go for?

Mike

**D.PASSMORE** · 04-23-2013, 09:07 AM

Randy, Do you have a OE TB 350 automatic transmission kick down cable?

rcm1958 · 04-23-2013, 11:54 AM

Hi Randy-
I'll take one of the spare tire holders off your hands.

I have misplaced all of your MO information, address, etc. Could you send that to me, plus exactly what the holder would cost, shipped to 33444.

Reed

teeitup · 04-23-2013, 12:58 PM

Mike, I will let you know if I gat any in, usually go for $15 or so

David, sorry none right now

Reed, the 2 I have left need straightened out some, I'd pick out the best one I have for $30 shipped

Thanks Randy

teeitup · 04-23-2013, 09:20 PM

Pics for Camtoys, the one does not have the little nuts to mount it, I've installed them using small bolts and nuts to replace these.

Vintage Windmills · 04-23-2013, 10:16 PM

Randy, how good are the 72 doors? Got any good bench seat foam yet?

teeitup · 04-24-2013, 08:09 AM

Jud, they are pretty decent, one small spot of rust on outer corner of pass and one dent on inner jam of drivers oh and the speaker holes. I'll get better pics later today. And I also have some pics of something else you may want, not the K20 yet though. Thanks Randy

teeitup · 04-24-2013, 08:47 AM

No bench seat yet, here are pics. 2nd pic shows the only rot in doors, its on the pass corner outside skin, not through. Other spots are surface rust. This door has the small mirrors holes and a set of bigger mirrors holes

teeitup · 04-24-2013, 08:49 AM

Drivers door, no rot, just surface rust. One dent on front jam 2nd pic. 4th pic one small dent and it also has mirror screw holes on this door

teeitup · 04-24-2013, 08:49 AM

Weren't you looking for some of these?

Vintage Windmills · 04-24-2013, 08:32 PM

Randy, think I'll hold out for some without speaker holes. I will have room in June to haul several doors so keep me in mind. Also if you find any nice metal floor beds or cummins diesels

How much on the clamps and shoot me the pics of the other thing i may be interested in...

teeitup · 04-24-2013, 09:20 PM

Jud, no problem on the doors, I will watch for you some others. The clamps was the other thing I was talking about, you can have them when you come

**Ol Blue K20** · 04-25-2013, 11:26 AM

Hey Randy, how's that grill shell in the pics?

teeitup · 04-25-2013, 04:43 PM

Dale, sorry I don't ship grills. I got your spring perch mailed out today. Thanks so much, Randy

**Ol Blue K20** · 04-25-2013, 06:27 PM

Thanks Randy, I'll let you know when I get it
Posted via Mobile Device

**Cash3481** · 04-26-2013, 08:51 AM

Randy,

Is the inner grill avaliable in post 58?
I may buy one local but wanted to check with you first.

Mike

bguild · 04-26-2013, 12:36 PM

Randy I am searching for a ac uncut radio patch for the dash. Let me know price shipped to KC
Posted via Mobile Device

teeitup · 04-26-2013, 05:03 PM

Dale, sounds good

Mike, that inner grill isn't any good, sorry

Brian, sorry no AC dash cutouts right now

Thanks Randy

04-23-2013, 09:07 AM	#52
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Getting ready for swap meet in Lawrence so here are some parts Randy, Do you have a OE TB 350 automatic transmission kick down cable?

04-23-2013, 11:54 AM	#53
rcm1958 Registered User Join Date: Dec 2012 Location: Delray Beach, FL Posts: 56	Re: Getting ready for swap meet in Lawrence so here are some parts Hi Randy- I'll take one of the spare tire holders off your hands. I have misplaced all of your MO information, address, etc. Could you send that to me, plus exactly what the holder would cost, shipped to 33444. Reed

04-23-2013, 12:58 PM	#54
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Getting ready for swap meet in Lawrence so here are some parts Mike, I will let you know if I gat any in, usually go for $15 or so David, sorry none right now Reed, the 2 I have left need straightened out some, I'd pick out the best one I have for $30 shipped Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-23-2013, 09:20 PM	#55
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Getting ready for swap meet in Lawrence so here are some parts Pics for Camtoys, the one does not have the little nuts to mount it, I've installed them using small bolts and nuts to replace these. Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-23-2013, 10:16 PM	#56
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Getting ready for swap meet in Lawrence so here are some parts Randy, how good are the 72 doors? Got any good bench seat foam yet? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

04-24-2013, 08:09 AM	#57
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Getting ready for swap meet in Lawrence so here are some parts Jud, they are pretty decent, one small spot of rust on outer corner of pass and one dent on inner jam of drivers oh and the speaker holes. I'll get better pics later today. And I also have some pics of something else you may want, not the K20 yet though. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-24-2013, 08:47 AM	#58
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Getting ready for swap meet in Lawrence so here are some parts No bench seat yet, here are pics. 2nd pic shows the only rot in doors, its on the pass corner outside skin, not through. Other spots are surface rust. This door has the small mirrors holes and a set of bigger mirrors holes Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-24-2013 at 12:17 PM.

04-24-2013, 08:49 AM	#59
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Getting ready for swap meet in Lawrence so here are some parts Drivers door, no rot, just surface rust. One dent on front jam 2nd pic. 4th pic one small dent and it also has mirror screw holes on this door Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-24-2013 at 12:19 PM.

04-24-2013, 08:32 PM	#61
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Getting ready for swap meet in Lawrence so here are some parts Randy, think I'll hold out for some without speaker holes. I will have room in June to haul several doors so keep me in mind. Also if you find any nice metal floor beds or cummins diesels How much on the clamps and shoot me the pics of the other thing i may be interested in... __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

04-24-2013, 09:20 PM	#62
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Getting ready for swap meet in Lawrence so here are some parts Jud, no problem on the doors, I will watch for you some others. The clamps was the other thing I was talking about, you can have them when you come __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-25-2013, 11:26 AM	#63
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Getting ready for swap meet in Lawrence so here are some parts Hey Randy, how's that grill shell in the pics? __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

04-25-2013, 04:43 PM	#64
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Getting ready for swap meet in Lawrence so here are some parts Dale, sorry I don't ship grills. I got your spring perch mailed out today. Thanks so much, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-25-2013, 06:27 PM	#65
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Getting ready for swap meet in Lawrence so here are some parts Thanks Randy, I'll let you know when I get it Posted via Mobile Device __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

04-26-2013, 08:51 AM	#66
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Getting ready for swap meet in Lawrence so here are some parts Randy, Is the inner grill avaliable in post 58? I may buy one local but wanted to check with you first. Mike

04-26-2013, 12:36 PM	#67
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: Getting ready for swap meet in Lawrence so here are some parts Randy I am searching for a ac uncut radio patch for the dash. Let me know price shipped to KC Posted via Mobile Device __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED



Register or Log In To remove these advertisements.

04-26-2013, 05:03 PM	#68
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Getting ready for swap meet in Lawrence so here are some parts Dale, sounds good Mike, that inner grill isn't any good, sorry Brian, sorry no AC dash cutouts right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.