Where does the horn wire go??

[weever82]

May sound silly but where do you put the horn wire in the column? I had a truck column rebuilt and ordered a new Billet Specialties wheel and adapter. It came with a ground wire but no horn wire?? and I didnt see one in the column... Horn no workie without a power wire for it, where does it go in the column? Sorry if a dumb question, it's my first column/wheel swap.

Thanks for reading!
Posted via Mobile Device

[Stocker]

Not sure about your exact application, but there's typically no "power wire" for the horn in the steering column.

When pressed, the horn button applies ground to a wire that goes to the horn relay under the dash.
Thus activated, the relay sends -12vdc to the horn(s).

[weever82]

Perfect, that's what I was hoping for! I'm installing that baby tonight then. Thanks again!
Posted via Mobile Device

[tinlid]

Check the instruction link below for a Grant wheel. See page 2 in particular. My 70 needed the wire part shown. It is not sold individually but when I called Grant they were kind enough to mail me one. The old Grant I took off had a different method. This is just a thought but check the page shown and see if your column looks like this. Could be the steering wheel being used may need this to connect.


http://www.grantproducts.com/files/i...7508-00-01.pdf