700r4 wiring

[tex_waco_usmc]

Gentlemen,

I just recently got the 700r4 and motor down on the chassis and I am in a hurry to get it running because I am running out of days with access to a workshop. (Until we close on the new house). My transmission connector for my wiring harness just absolutely fell apart and left me with wires and pins but no plastic to push down in the hole!

Can someone please help me out with which one of these wires goes in the right pin on the new connector?

Drivetrain is from an 87 1/2ton 2WD LWB pickup, TBI 350 with 700r4. As soon as I get to the shop this morning I will get the transmission code off of it and post it if you need that.

I really appreciate the help.

[tex_waco_usmc]

My transmission code : 7mwm-y-00682243-021b

I appreciate the help in advance! Wire colors are: purple, blue, and tan w/ blk stripe
Posted via Mobile Device

[tex_waco_usmc]

Ttt anyone??? To clarify I am talking about the four prong connector on the left side of the transmission! I'm ready to set the can back down but don't want to do that until everything is complete.
Posted via Mobile Device

[makman1297]

Here is the wiring from mine. A is purple, B is blue and the tan/blk is behind the A pin, think its D.

[tex_waco_usmc]

Originally Posted by makman1297

Here is the wiring from mine. A is purple, B is blue and the tan/blk is behind the A pin, think its D.

Thank you gonna use this for now!
Posted via Mobile Device