CAN I see your EXHAUST system?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70blackfish · 05-18-2013, 11:02 PM

please post pictures of your single or duel exhaust systems, from underneath..
would be great to see how they were routed...

Square_78 · 05-19-2013, 07:19 AM

Mine is tucked up under the frame. Can't reallly see it. You need short headers. Then run it above the tranny crossmember. Then cut 4" holes through the trailing arm crossmember and then up and over the rear end and out the back. Or dump it in front of the rear tires. That might be easier on yours with it being bagged. Flowtech 67 camaro shorty headers fit perfect on mine and don't hang below the frame. I don't have any pics sorry.
Posted via Mobile Device

Sport/Truck · 05-19-2013, 10:05 AM

Here's mine

dznucks · 05-19-2013, 10:22 AM

You want a peek under my girls skirt???

here are two links that show how my system has evolved. when i did my motor swap i went with new headers and re-routed everything from the crossmember forward.

http://67-72chevytrucks.com/vboard/s...d.php?t=380456

http://67-72chevytrucks.com/vboard/s...d.php?t=548617

Scott>72-GMC · 05-19-2013, 10:22 AM

Posted via Mobile Device

hfd410 · 05-19-2013, 10:23 AM

thru the X member

Scott>72-GMC · 05-19-2013, 10:24 AM

Posted via Mobile Device
Not much of a view of the whole thing but I love this pic
Posted via Mobile Device

**70CHEVYBB** · 05-19-2013, 11:24 PM

I will be bending up a 3" polished stainless system this saturday. I will post pics before,during and after. I guess having 25 years custom pipe bending experience and being the manager of a Meineke Car Care has its perks.

POPO1984 · 05-20-2013, 01:30 AM

were gonna hold you to that

BigDaddyV · 05-20-2013, 07:13 AM

I'll be watching O.o
-

1972SUPERSB · 05-20-2013, 11:35 AM

Here is mine I just got done about a month ago
Posted via Mobile Device
Posted via Mobile Device

1972SUPERSB · 05-20-2013, 11:36 AM

Posted via Mobile Device
Posted via Mobile Device

1972SUPERSB · 05-20-2013, 11:47 AM

Posted via Mobile Device
Posted via Mobile Device

MikeByrne · 05-20-2013, 12:11 PM

I have a question regarding the stock heads on my 69 c10 (stock 350 two barrel crab). I am getting ready to remove my factory exhaust and put on a set of headers and new exhaust.
So when I bought the truck it came with a set of headers that I would like to put on, the port is circular. I haven’t pulled the stock exhaust manifold, circular match up with the head?
Thank you,
Mike

1972SUPERSB · 05-20-2013, 12:15 PM

You might wanna make a new thread for your question. You will get better response
Posted via Mobile Device

MikeByrne · 05-20-2013, 12:17 PM

will do, first post. thank you!

1972SUPERSB · 05-20-2013, 12:18 PM

Quote:

Originally Posted by MikeByrne

will do, first post. thank you!

No problem welcome!
Posted via Mobile Device

MikeByrne · 05-20-2013, 12:19 PM

may i ask, how are you posting mobie?

1972SUPERSB · 05-20-2013, 12:23 PM

Quote:

Originally Posted by MikeByrne

may i ask, how are you posting mobie?

I sent you a private message
Posted via Mobile Device

Lee H · 05-20-2013, 12:28 PM

Quote:

Originally Posted by MikeByrne

may i ask, how are you posting mobie?

I'd like to know also.

Sport/Truck · 05-25-2013, 08:49 AM

Quote:

Originally Posted by Lee H

I'd like to know also.

+1

70blackfish · 05-25-2013, 11:29 AM

my truck is bagged and sits low, im going to make holes in the cross member, but not sure where to put the mufflers.....

heathbirkendahl · 05-25-2013, 11:59 AM

Posted via Mobile Device

Bfork1 · 05-25-2013, 12:33 PM

Posted via Mobile Device
Posted via Mobile Device

Bfork1 · 05-25-2013, 12:54 PM

Posted via Mobile Device
Posted via Mobile Device

05-18-2013, 11:02 PM	#1
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	CAN I see your EXHAUST system?? please post pictures of your single or duel exhaust systems, from underneath.. would be great to see how they were routed... __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

05-19-2013, 07:19 AM	#2
Square_78 Registered User Join Date: Mar 2012 Location: Okanagan Valley, BC, Canada Posts: 1,237	Re: CAN I see your EXHAUST system?? Mine is tucked up under the frame. Can't reallly see it. You need short headers. Then run it above the tranny crossmember. Then cut 4" holes through the trailing arm crossmember and then up and over the rear end and out the back. Or dump it in front of the rear tires. That might be easier on yours with it being bagged. Flowtech 67 camaro shorty headers fit perfect on mine and don't hang below the frame. I don't have any pics sorry. Posted via Mobile Device __________________ #teamlongbed "I refuse to go disc brakes. I actually love drum brakes. It makes for an adventure." - 50bomb 1978 Chevy shop truck - static 6/8" 1970 GMC 1500 - Accuair eLevel Resto-mod http://67-72chevytrucks.com/vboard/s...d.php?t=537497

05-19-2013, 10:05 AM	#3
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: CAN I see your EXHAUST system?? Here's mine Attached Images __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

05-19-2013, 10:22 AM	#4
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: CAN I see your EXHAUST system?? You want a peek under my girls skirt??? here are two links that show how my system has evolved. when i did my motor swap i went with new headers and re-routed everything from the crossmember forward. http://67-72chevytrucks.com/vboard/s...d.php?t=380456 http://67-72chevytrucks.com/vboard/s...d.php?t=548617 Last edited by dznucks; 05-19-2013 at 10:31 AM.

05-19-2013, 10:22 AM	#5
Scott>72-GMC Registered User Join Date: Jan 2013 Location: New providence ia Posts: 1,018	Re: CAN I see your EXHAUST system?? Posted via Mobile Device __________________ 72 GMC super custom.

05-19-2013, 10:23 AM	#6
hfd410 Registered User Join Date: Jul 2012 Location: Burleson Texas Posts: 570	Re: CAN I see your EXHAUST system?? thru the X member Attached Images

05-19-2013, 10:24 AM	#7
Scott>72-GMC Registered User Join Date: Jan 2013 Location: New providence ia Posts: 1,018	Re: CAN I see your EXHAUST system?? Posted via Mobile Device Not much of a view of the whole thing but I love this pic Posted via Mobile Device Attached Images __________________ 72 GMC super custom.

05-19-2013, 11:24 PM	#8
70CHEVYBB Senior Member Join Date: Feb 2012 Location: chillicothe, illinois Posts: 690	Re: CAN I see your EXHAUST system?? I will be bending up a 3" polished stainless system this saturday. I will post pics before,during and after. I guess having 25 years custom pipe bending experience and being the manager of a Meineke Car Care has its perks.

05-20-2013, 01:30 AM	#9
POPO1984 Registered User Join Date: Jul 2009 Location: Houston, Tx Posts: 1,133	Re: CAN I see your EXHAUST system?? were gonna hold you to that __________________ 1972 SWB Medium Olive South Houston Instagram: Antbish84

05-20-2013, 07:13 AM	#10
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: CAN I see your EXHAUST system?? I'll be watching O.o - __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

05-20-2013, 11:35 AM	#11
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	Re: CAN I see your EXHAUST system?? Here is mine I just got done about a month ago Posted via Mobile Device Posted via Mobile Device Attached Images __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior

05-20-2013, 11:36 AM	#12
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	Re: CAN I see your EXHAUST system?? Posted via Mobile Device Posted via Mobile Device Attached Images __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior

05-20-2013, 11:47 AM	#13
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	Re: CAN I see your EXHAUST system?? Posted via Mobile Device Posted via Mobile Device Attached Images __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior

05-20-2013, 12:11 PM	#14
MikeByrne Registered User Join Date: May 2013 Location: Canandensis, PA Posts: 53	Re: CAN I see your EXHAUST system?? I have a question regarding the stock heads on my 69 c10 (stock 350 two barrel crab). I am getting ready to remove my factory exhaust and put on a set of headers and new exhaust. So when I bought the truck it came with a set of headers that I would like to put on, the port is circular. I haven’t pulled the stock exhaust manifold, circular match up with the head? Thank you, Mike

05-20-2013, 12:15 PM	#15
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	Re: CAN I see your EXHAUST system?? You might wanna make a new thread for your question. You will get better response Posted via Mobile Device __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior



Register or Log In To remove these advertisements.

05-20-2013, 12:17 PM	#16
MikeByrne Registered User Join Date: May 2013 Location: Canandensis, PA Posts: 53	Re: CAN I see your EXHAUST system?? will do, first post. thank you!

05-20-2013, 12:19 PM	#18
MikeByrne Registered User Join Date: May 2013 Location: Canandensis, PA Posts: 53	Re: CAN I see your EXHAUST system?? may i ask, how are you posting mobie?

05-25-2013, 11:29 AM	#22
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: CAN I see your EXHAUST system?? my truck is bagged and sits low, im going to make holes in the cross member, but not sure where to put the mufflers..... Attached Images __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

05-25-2013, 11:59 AM	#23
heathbirkendahl Registered User Join Date: Jul 2012 Location: Campbell, CA Posts: 452	Re: CAN I see your EXHAUST system?? Posted via Mobile Device Attached Images __________________ 1971 C/10 - Orange & White 2009 GMC 1500 - Lowered 3/4 22' KMC Slides

05-25-2013, 12:33 PM	#24
Bfork1 Registered User Join Date: Apr 2013 Location: Birmingham,- Posts: 11	Re: CAN I see your EXHAUST system?? Posted via Mobile Device Posted via Mobile Device Attached Images

05-25-2013, 12:54 PM	#25
Bfork1 Registered User Join Date: Apr 2013 Location: Birmingham,- Posts: 11	Re: CAN I see your EXHAUST system?? Posted via Mobile Device Posted via Mobile Device Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.