![]() |
![]() |
#1 |
Registered User
Join Date: Nov 2003
Location: Mandan, ND
Posts: 422
|
Radiator Cleanout
Anyone have any tips on flushing out my radiator? Truck has sat for a couple of years. I am sure there is something I need to do the radiator.
Thanks
__________________
Life is full of choices and a Chevy is the best choice. 1990 Chevy SWB |
![]() |
![]() |
![]() |
#2 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
![]()
If it's been setting a couple of years I would pull it and do a really good washing out, and let all the water lines drain good. You don't want to take the chance of breaking something loose and it clog up the passages in the motor. That's me anyway.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#3 |
Wiseass secured himself a BAN
Join Date: Nov 2000
Location: MOON!!!
Posts: 2,282
|
You can have it rodded out. That would be the best way to clean it out if it is really dirty. I did mine myself. Propane torch and a roll of solder and 1/16" x 1/8 flat bar. Took me a day to do it.
|
![]() |
![]() |
![]() |
#4 |
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
prestone sells a T that u unstall into one of your heater hoses
pop the elbow spout into the rad. cap hole (included) turn on the hose...start the truck.....run till clear..... |
![]() |
![]() |
![]() |
#5 |
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
One problem with the tee, it won't backflush the radiator completely. Best way is to remove the radiator and stand it upside down. Run the hose in the outlet and let the junk flow out the filler neck and inlet hose. While I have it apart, I remove the thermostat and hook the garden hose to the heater hose. Flush forward through the thermostat, then put the hose in the thermostat hole and let it run backwards.
__________________
Fred There is no such thing as too much cam...just not enough engine. ![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|