The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-04-2013, 05:59 PM   #1
Col. Mustard
Registered User
 
Join Date: Jun 2013
Location: vancouver,wa
Posts: 11
just realized i started in the wrong place

Hey everyone I'm Levi just joined the forum, haven't had a chance to look around but seems like a great place. I have a 73 c10 with a 250 and 3 on the tree, has been a pretty good workhorse until recently.

Couple weeks ago I found out the head was cracked, got a new one slammed in and got the truck running great. Only issue is the temp gauge The one on the water outlet/thermostat housing broke so went to use the one on the head. Using the stock wiring it would either bounce all over the place or redline within 5-10 minutes. Put a equus mechanical gauge in and sat at 195 for 20+ minutes idling, but as soon as I start driving it will fluctuate between 195-230ish. Took it to a shop and they are telling me that the sensor in the head is for a light (which I don't have) and the one in the tstat housing is for the gauge, at this point I don't care which is which im just tired of not driving my truck.

Anyhow thanks in advance for any help and hopefully I can return the favor sometime
Col. Mustard is offline   Reply With Quote
Old 06-04-2013, 07:45 PM   #2
75chev4x4
Registered User
 
75chev4x4's Avatar
 
Join Date: May 2012
Location: Estacada, Oregon
Posts: 254
Re: just realized i started in the wrong place

Ok I would say if u put an aftermarket gauge in with its own sender and it is still fluctuating and running hot ur prob is with the engine. Did u burp the radiator when n u swapped the head and are u losing any coolant? Anything else weird going on with the engine no heat from heater?
75chev4x4 is offline   Reply With Quote
Old 06-04-2013, 08:34 PM   #3
Col. Mustard
Registered User
 
Join Date: Jun 2013
Location: vancouver,wa
Posts: 11
Re: just realized i started in the wrong place

I had burped the system, and the shop I took it to did as well, plenty of heat from the vents...only thing I haven't done is get a heat gun on it and verify how hot its running. Talked to a guy and he says that the 195 range tstat is too much, heading out to get a lower range one and a heat reader.
Col. Mustard is offline   Reply With Quote
Old 06-04-2013, 09:22 PM   #4
75chev4x4
Registered User
 
75chev4x4's Avatar
 
Join Date: May 2012
Location: Estacada, Oregon
Posts: 254
Re: just realized i started in the wrong place

Did you change any hoses or anything? I had same thing hapen once and I had a plugged heater return house and it would get hot after 5 min everytime. Yea maybe try new tstat might be too hot or could be bad one all together.
75chev4x4 is offline   Reply With Quote
Old 06-04-2013, 09:31 PM   #5
75chev4x4
Registered User
 
75chev4x4's Avatar
 
Join Date: May 2012
Location: Estacada, Oregon
Posts: 254
Re: just realized i started in the wrong place

And your coolant level looks good ? Your not loosing any and your oil looks nice and black or clean? Hows your radiator look?
75chev4x4 is offline   Reply With Quote
Old 06-04-2013, 09:38 PM   #6
Col. Mustard
Registered User
 
Join Date: Jun 2013
Location: vancouver,wa
Posts: 11
Re: just realized i started in the wrong place

coolant and oil both are staying clean, doesn't look like I'm losing either. had changed one hose cuz it had split, but other than that I flushed the system before putting the new head on.
Col. Mustard is offline   Reply With Quote
Old 06-04-2013, 09:40 PM   #7
75chev4x4
Registered User
 
75chev4x4's Avatar
 
Join Date: May 2012
Location: Estacada, Oregon
Posts: 254
Re: just realized i started in the wrong place

Yea try the heat gun maybe the gauge is wacky, hmm. Wish I had some time to come up and help u ur just across the bridge from me. Youll get it though.
75chev4x4 is offline   Reply With Quote
Old 06-04-2013, 10:10 PM   #8
Col. Mustard
Registered User
 
Join Date: Jun 2013
Location: vancouver,wa
Posts: 11
Re: just realized i started in the wrong place

hopefully its the gauge or something simple, getting really tired of lookin and not driving.. appreciate the offer I'll let you know what I figure out
Col. Mustard is offline   Reply With Quote
Old 06-05-2013, 10:57 PM   #9
Col. Mustard
Registered User
 
Join Date: Jun 2013
Location: vancouver,wa
Posts: 11
Re: just realized i started in the wrong place

so it looks like it was the tstat, put in a 185 range and ran it for a good half hour, temp gun got up to around 220-230 on the head right by the sensor, plug side was around 180-190, no fluctuation on the new gauge while driving...goin to do a couple more test runs before I start driving regularly
Col. Mustard is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:06 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com