Need help with Brake/turn lights - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SEVEND2 · 11-28-2003, 05:46 PM

Ok, I got tail lights, but no Brake or Turn signal in the back

Any ideas

jef5150 · 11-28-2003, 05:54 PM

fuse

Longhorn Man · 11-28-2003, 06:02 PM

If not a fuse, probably turn signal switch.
Forget about the grounds...99.999% chance that is will NOT be the ground.
You have checked the bulbs already though, yes?

SEVEND2 · 11-28-2003, 06:42 PM

Ok, update........

Fuses are good, checked them ALL in the fuse block. I have Front Turn signals and on the inside.

The bubls i will check but could i loose both bulbs at the same time?

67sss · 11-28-2003, 06:47 PM

Got flashers in the back?

SEVEND2 · 11-28-2003, 09:57 PM

Didnt check the flashers, But did not, they were not working either.

Took off lens covers and checked Bulbs.............What ya know, both blown

I guess when the Volt Reg went tout it Fried them

Thanks
Lonhorn man, Jeff 5150, 67 sss

U guys

Longhorn Man · 11-28-2003, 11:24 PM

Even though it seems stupid to double check them...I always do.
Proved the boss man wrong at the shop last week on this.

11-28-2003, 05:46 PM	#1
SEVEND2 Registered User Join Date: Aug 2001 Location: Menifee, Calif, USA Posts: 2,146	Need help with Brake/turn lights Ok, I got tail lights, but no Brake or Turn signal in the back Any ideas __________________ With a 1972 Chevy Custom-10 Long bed w/350cid th350, (under-construction). Progress on truck so far (follow link): http://67-72chevytrucks.com/vboard/s...ad.php?t=51051 and stage 2 http://67-72chevytrucks.com/vboard/s...ad.php?t=58132 ~ "Why couldn't you have just put the bunny back in the box?" ~

11-28-2003, 06:42 PM	#4
SEVEND2 Registered User Join Date: Aug 2001 Location: Menifee, Calif, USA Posts: 2,146	Ok, update........ Fuses are good, checked them ALL in the fuse block. I have Front Turn signals and on the inside. The bubls i will check but could i loose both bulbs at the same time? __________________ With a 1972 Chevy Custom-10 Long bed w/350cid th350, (under-construction). Progress on truck so far (follow link): http://67-72chevytrucks.com/vboard/s...ad.php?t=51051 and stage 2 http://67-72chevytrucks.com/vboard/s...ad.php?t=58132 ~ "Why couldn't you have just put the bunny back in the box?" ~

11-28-2003, 09:57 PM	#6
SEVEND2 Registered User Join Date: Aug 2001 Location: Menifee, Calif, USA Posts: 2,146	Didnt check the flashers, But did not, they were not working either. Took off lens covers and checked Bulbs.............What ya know, both blown I guess when the Volt Reg went tout it Fried them Thanks Lonhorn man, Jeff 5150, 67 sss U guys __________________ With a 1972 Chevy Custom-10 Long bed w/350cid th350, (under-construction). Progress on truck so far (follow link): http://67-72chevytrucks.com/vboard/s...ad.php?t=51051 and stage 2 http://67-72chevytrucks.com/vboard/s...ad.php?t=58132 ~ "Why couldn't you have just put the bunny back in the box?" ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-28-2003, 05:54 PM	#2
jef5150 Inline 69 Join Date: Apr 2003 Location: valleysprings,california Posts: 1,018	fuse

11-28-2003, 06:02 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	If not a fuse, probably turn signal switch. Forget about the grounds...99.999% chance that is will NOT be the ground. You have checked the bulbs already though, yes?

11-28-2003, 06:47 PM	#5
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,326	Got flashers in the back?

11-28-2003, 11:24 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Even though it seems stupid to double check them...I always do. Proved the boss man wrong at the shop last week on this.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.