Update on what I have to sell !some real goodies - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*gn4u2c* · 11-26-2003, 11:08 AM

I have a 4x4 sm465 attached to a np 205 works 100 % ..thats right the tough stuff !!! $175.00

I also have a sm 465 4x2 with bell,clutch,flywheel all 100% $50.00

I have a 14 bolt non FF $10.00 drum to drum. not sure what gears non posi.

I have a 14 bolt FF yes the good one drum to drum 3.73 gears
$100.00

I have 2 perfect working np203 's one is from a 74auto one is from a 75auto $75.00 each.

set of 10 bolt rears with auto hubs complete with 3.73 's $200.00 for the set.

I would like you to pickup items. I can deliverup to 25 miles for gas money. I can meet you along I-83 or whatever
e-me any questions you may have about pickup or delivery.

Old Chevy Lover · 11-27-2003, 02:20 PM

What's the width on the 14 bolt FF? either backing plate to backing plate, outside drum to drum? Also, what is the width of the mounting pads? Where are you located at in PA?

*gn4u2c* · 11-28-2003, 12:34 PM

glenville pa 17329 or you can pick it up at my pops house parkton md 21120
I will measure it sat am for you.

Old Chevy Lover · 11-28-2003, 12:59 PM

ahh.. I was hoping you were a lot farther west. I am in Ohio, and would be a little too far to drive just to get a good rearend. thanks anyway.

LKJR · 11-29-2003, 02:18 AM

I"m looking for a set of spring plates for the 14FF any chance you have a set of those?

11-26-2003, 11:08 AM	#1
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	Update on what I have to sell !some real goodies I have a 4x4 sm465 attached to a np 205 works 100 % ..thats right the tough stuff !!! $175.00 I also have a sm 465 4x2 with bell,clutch,flywheel all 100% $50.00 I have a 14 bolt non FF $10.00 drum to drum. not sure what gears non posi. I have a 14 bolt FF yes the good one drum to drum 3.73 gears $100.00 I have 2 perfect working np203 's one is from a 74auto one is from a 75auto $75.00 each. set of 10 bolt rears with auto hubs complete with 3.73 's $200.00 for the set. I would like you to pickup items. I can deliverup to 25 miles for gas money. I can meet you along I-83 or whatever e-me any questions you may have about pickup or delivery.

11-27-2003, 02:20 PM	#2
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	What's the width on the 14 bolt FF? either backing plate to backing plate, outside drum to drum? Also, what is the width of the mounting pads? Where are you located at in PA? __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

11-28-2003, 12:59 PM	#4
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	ahh.. I was hoping you were a lot farther west. I am in Ohio, and would be a little too far to drive just to get a good rearend. thanks anyway. __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

11-29-2003, 02:18 AM	#5
LKJR Registered User Join Date: May 2000 Location: Lubbock, Tx Posts: 85	I"m looking for a set of spring plates for the 14FF any chance you have a set of those? __________________ 1st Gen Blazers Like em big and topless

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-28-2003, 12:34 PM	#3
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	glenville pa 17329 or you can pick it up at my pops house parkton md 21120 I will measure it sat am for you.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.