What door seals from other vehicles fit our trucks? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72gmc350sbc · 07-22-2013, 12:46 PM

I've heard that Dakota or Durango door seals work, is this true? Any other cars or trucks I should look for. I have a 72 gmc. Thanks for the help guys.

chopnchaneled · 07-22-2013, 12:51 PM

I used the slip on from gmc pauls, think they were dakota and they do fine.

*Mister-B* · 07-22-2013, 02:18 PM

Quote:

Originally Posted by 72gmc350sbc

I've heard that Dakota or Durango door seals work, is this true? Any other cars or trucks I should look for. I have a 72 gmc. Thanks for the help guys.

I've heard so much fussing and complaining just to get proper replacements to fit right. I don't know that using seals intended for an entirely different vehicle is going to be a very pleasant experience for you
Posted via Mobile Device

bbadfred · 07-22-2013, 02:41 PM

GMC Pauls are easy to install (the hardest part is cleaning off the old glue) they fit nice and seal very well. They come in a roll with a little extra and are not pre formed

**leddzepp** · 07-22-2013, 02:44 PM

Quote:

Originally Posted by bbadfred

GMC Pauls are easy to install (the hardest part is cleaning off the old glue) they fit nice and seal very well.

Agree. They are 10x better than the original glue on type. They seal perfectly and a five year old can install them with his eyes closed.
Posted via Mobile Device

bbadfred · 07-22-2013, 02:53 PM

Quote:

Originally Posted by leddzepp

Agree. They are 10x better than the original glue on type. They seal perfectly and a five year old can install them with his eyes closed.
Posted via Mobile Device

They really are that easy!!

**LockDoc** · 07-22-2013, 03:12 PM

-
Dodge makes the best ones... '87-'97 Dodge Dakota, pick 'em up at your local salvage yard. You can find some nice ones for 5-10 bucks per pair. The nice thing is they are slip fit, you don't have to glue them on. Be sure to get the connector that joins them at the seam. Sometimes it falls out when you remove them. All you need to remove them is a phillips screwdriver, small hammer, and a small prybar. You have to cut about 3" off the length...

LockDoc

72gmc350sbc · 07-22-2013, 06:46 PM

Thanks for the info, I think I'll try the dodge ones first, just to save some money, and if they dont work ill just order from GMCpaul. thanks.

Rctreadaway · 07-22-2013, 10:01 PM

I grabbed mine out of a 200x model Silverado. Tahoe and gmc models will be the same. Had about ten inches to cut off. Just measure the perimeter of your door seal area and then measure the one you find in the junk yard if you want to be sure. It just pulls off and presses on. That simple
Posted via Mobile Device

**70cst** · 07-22-2013, 10:27 PM

Great info

kaynnon · 07-23-2013, 11:21 AM

got mine from a dakota for 10 bucks, they work fine

07-22-2013, 12:46 PM	#1
72gmc350sbc Registered User Join Date: Jul 2012 Location: BackWoods, Michigan Posts: 94	What door seals from other vehicles fit our trucks? I've heard that Dakota or Durango door seals work, is this true? Any other cars or trucks I should look for. I have a 72 gmc. Thanks for the help guys. __________________ 1972 GMC LWB

07-22-2013, 12:51 PM	#2
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Re: What door seals from other vehicles fit our trucks? I used the slip on from gmc pauls, think they were dakota and they do fine. __________________ I don't think we get smarter as we get older. We just run out of Stupid things to do.

07-22-2013, 02:41 PM	#4
bbadfred bbadfred Join Date: Mar 2008 Location: rantoul Il Posts: 461	Re: What door seals from other vehicles fit our trucks? GMC Pauls are easy to install (the hardest part is cleaning off the old glue) they fit nice and seal very well. They come in a roll with a little extra and are not pre formed

07-22-2013, 03:12 PM	#7
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,772	Re: What door seals from other vehicles fit our trucks? - Dodge makes the best ones... '87-'97 Dodge Dakota, pick 'em up at your local salvage yard. You can find some nice ones for 5-10 bucks per pair. The nice thing is they are slip fit, you don't have to glue them on. Be sure to get the connector that joins them at the seam. Sometimes it falls out when you remove them. All you need to remove them is a phillips screwdriver, small hammer, and a small prybar. You have to cut about 3" off the length... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

07-22-2013, 06:46 PM	#8
72gmc350sbc Registered User Join Date: Jul 2012 Location: BackWoods, Michigan Posts: 94	Re: What door seals from other vehicles fit our trucks? Thanks for the info, I think I'll try the dodge ones first, just to save some money, and if they dont work ill just order from GMCpaul. thanks. __________________ 1972 GMC LWB

07-22-2013, 10:01 PM	#9
Rctreadaway Registered User Join Date: Jan 2013 Location: Monroe, NC Posts: 39	Re: What door seals from other vehicles fit our trucks? I grabbed mine out of a 200x model Silverado. Tahoe and gmc models will be the same. Had about ten inches to cut off. Just measure the perimeter of your door seal area and then measure the one you find in the junk yard if you want to be sure. It just pulls off and presses on. That simple Posted via Mobile Device

07-22-2013, 10:27 PM	#10
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: What door seals from other vehicles fit our trucks? Great info __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

07-23-2013, 11:21 AM	#11
kaynnon Registered User Join Date: Sep 2012 Location: Huntsville, Al Posts: 72	Re: What door seals from other vehicles fit our trucks? got mine from a dakota for 10 bucks, they work fine __________________ 72 Cheyenne LWB

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.