![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2013
Location: B'more, hon!
Posts: 31
|
securing fan shroud?
Hey gang!
So, I replaced the leaky 4 row radiator of unknown origin with a nice 3 row and a functional fan shroud. I didn't change the lower radiator mounts, but everything went together in a way that seemed like it all meant to work together. So far so good. However, I don't see how to secure the bottom of the fan shroud. It fits perfectly with the radiator, and looks like there's a tab on each side that should slide into something, but I don't see what that something is. The lip of the core support is a bit below that, so maybe I'm missing something. Possibly I need new lower rubbers? Does anyone have a picture of how the bottom of their fan shroud is secured? That would help a lot. Thanks!! |
![]() |
![]() |
![]() |
#2 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,490
|
Re: securing fan shroud?
-
No pictures but there are two metal clips that secure the bottom. They slide onto the lip on the core support and the shroud slips down into them. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2013
Location: B'more, hon!
Posts: 31
|
Re: securing fan shroud?
Oh! Is there a source for these? What would I search for?
|
![]() |
![]() |
![]() |
#4 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,490
|
Re: securing fan shroud?
On the parts board.
I just typed in "shroud clips" in the google search box above, clicked on the circle in front of "67-72chevytrucks.com" and clicked on the "Google" button. http://67-72chevytrucks.com/vboard/s...d.php?t=581641 http://67-72chevytrucks.com/vboard/s...d.php?t=534206 One of them is an old thread but the pictures are good. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 08-25-2013 at 10:26 PM. |
![]() |
![]() |
![]() |
#6 | |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,490
|
Re: securing fan shroud?
Quote:
I'm thinking those might be a little small. I went out and crawled under the '70 and mine measure 7/8" wide and 1 1/4" tall. I don't have a clue if they are available new or not.... Probably have to keep a lookout on the parts board. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Jun 2012
Location: Fitchburg,Mass
Posts: 737
|
Re: securing fan shroud?
This is whats on my 72 for the shroud to slide in too. then use the screws on top
__________________
62 Willys 4wd Pickup : 72 C-10 swb 504 stroker ![]() |
![]() |
![]() |
![]() |
#8 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,490
|
Re: securing fan shroud?
-
I'm hoping this is the right orientation. Looks like it. I lightened it up a little too LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jul 2013
Location: B'more, hon!
Posts: 31
|
Re: securing fan shroud?
Thanks for the responses and the photos!
I'll have to check to see if the clips are on the core support I got with the radiator... the truck and parts are at a friend's house. In the meantime, i'll see if I can find a source for the clips. Otherwise, I might have to fab something. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|