Camaro Caliper Brackets

[425HP409]

Originally Posted by 425HP409

I installed the kit from Captainfab, and it works great. I resolved two issues with the installation, Combination Valve and Parking Brake Cables. My truck started out as a four wheel drum, and I had previously installed 72 front discs.
1. Combination valve - I used the factory 68 brake light switch, no proportioning valve and no metering valve. No metering valve needed with 4 wheel disc, and so far works great with no proportioning valve. I installed a master cylinder for 4 wheel disc.
2. Parking Brake - My truck is a short bed, however the long and short bed trucks use the same rear cables, so my method should work for all trucks. I was able to use the Camaro factory rear parking brake cables and the factory Chevy intermediate cable. I moved the intermediate cable from the trailing arms to the inside of the frame, connecting to the Camaro cables. I fabricated new brackets for the front of the rear cables and made links to take the slack out of the intermediate cable. The photos show how I did it.

....

Page two of photos

[Captainfab]

Thank you Charles for posting this info along with those well detailed pics.