KS Four Core & Three Core Rad. Mounts F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 08-23-2013, 05:39 PM

One pair of 4 core upper rad mounts. No rubbers or nut plates but glass beaded, primed and painted semi-gloss black. $20 shipped

One pair of 2 & 3 core upper rad mounts. Nice rubber cushions with nut plates included. Glass beaded, primed and painted semi-gloss black. $ 25 shipped

Money order only, do not have a Paypal account. Please reply in thread.

88Ironduke · 08-23-2013, 10:34 PM

Silly question, what measurement would be needed to see if a radiator was a 3 or 4 core radiator? I need a set of these but the replacment radiator I got was free, but the PO didn't know 3 or 4 cores. If some one on here could tell me one way or the other I'll buy a set.

88Ironduke

**Ironhorse** · 08-23-2013, 10:48 PM

Since changing to a 4 core radiator I can get you those dimensions tomorrow but did not keep the 3 core as it was rotted out. Sold it for scrap. Surely someone has them, maybe check with your local parts house if they have a 3 core in stock?

Went to the shop and looked at my '71 4x4 radiator. Measured just the cores not the retainer ridges on the tanks. 4 core radiator mearures at 2 5/8 " thick. Alfter doing that I did a SEARCH from the board using "radiator diferances" and " radiator thickness " in the SEARCH window and found this from another member:
4 Core thickness = 2 5/8" 3 Core thickness = 2" 2 Core thickness = 1 1/4 "

The 2 and 3 core radiators use the same mounts while the 4 core radiator uses a mount all of it's own. Hope that is some help to you.

**Ironhorse** · 08-24-2013, 10:45 AM

ttt bump

88Ironduke · 08-24-2013, 02:06 PM

Thanks. I'll be heading to the shop tomorrow so I can get good measurements.

88

**Ironhorse** · 08-24-2013, 05:45 PM

88Ironduke, please re-read my previous post. My fingers don't always type what my brain is thinking, LOL.

The 2 core radiator is 1 1/4" thick.

HotRod C/10 · 08-24-2013, 05:56 PM

what are nut plates?

**Ironhorse** · 08-24-2013, 07:30 PM

Probably not the " correct " term for them but it's what I call them. The small tin plates with a mounting hole that fits the shroud end of the radiator support upper bracket. The shroud bolt/screw fits into it when mounting the radiator/shroud together. Two required, one for each upper rad support. Common to both sizes of rad mounts. Most likely could be had at a parts house or hardware store

Any body know what the real "true" name for them is, LOL

?

**Ironhorse** · 08-26-2013, 07:34 AM

a still have these bump

**Ironhorse** · 09-02-2013, 11:32 AM

ttt one last time

JimH2828 · 09-02-2013, 12:19 PM

I take the 4 cores for $20 shipped. PM me.

Thanks
Jim

**Ironhorse** · 09-02-2013, 01:19 PM

FOUR CORE mounts SOLD TO JimH2828 PM sent with payment info.

The 2 & 3 core rad. mounts still available.

**Ironhorse** · 09-06-2013, 06:40 PM

Payment received and 4 core upper mounts shipped. Thanks, JimH2828

2 & 3 core upper mounts with rubber cushions still available. Blasted, primed and painted $25 to your door.

08-23-2013, 05:39 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Four Core & Three Core Rad. Mounts F/S One pair of 4 core upper rad mounts. No rubbers or nut plates but glass beaded, primed and painted semi-gloss black. $20 shipped One pair of 2 & 3 core upper rad mounts. Nice rubber cushions with nut plates included. Glass beaded, primed and painted semi-gloss black. $ 25 shipped Money order only, do not have a Paypal account. Please reply in thread. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-23-2013, 10:34 PM	#2
88Ironduke Registered User Join Date: Jul 2010 Location: Willingboro, NJ Posts: 489	Re: Four Core & Three Core Rad. Mounts F/S Silly question, what measurement would be needed to see if a radiator was a 3 or 4 core radiator? I need a set of these but the replacment radiator I got was free, but the PO didn't know 3 or 4 cores. If some one on here could tell me one way or the other I'll buy a set. 88Ironduke

08-23-2013, 10:48 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S Since changing to a 4 core radiator I can get you those dimensions tomorrow but did not keep the 3 core as it was rotted out. Sold it for scrap. Surely someone has them, maybe check with your local parts house if they have a 3 core in stock? Went to the shop and looked at my '71 4x4 radiator. Measured just the cores not the retainer ridges on the tanks. 4 core radiator mearures at 2 5/8 " thick. Alfter doing that I did a SEARCH from the board using "radiator diferances" and " radiator thickness " in the SEARCH window and found this from another member: 4 Core thickness = 2 5/8" 3 Core thickness = 2" 2 Core thickness = 1 1/4 " The 2 and 3 core radiators use the same mounts while the 4 core radiator uses a mount all of it's own. Hope that is some help to you. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 08-24-2013 at 05:44 PM. Reason: Added info

08-24-2013, 10:45 AM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S ttt bump __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-24-2013, 02:06 PM	#5
88Ironduke Registered User Join Date: Jul 2010 Location: Willingboro, NJ Posts: 489	Re: Four Core & Three Core Rad. Mounts F/S Thanks. I'll be heading to the shop tomorrow so I can get good measurements. 88

08-24-2013, 05:45 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S 88Ironduke, please re-read my previous post. My fingers don't always type what my brain is thinking, LOL. The 2 core radiator is 1 1/4" thick. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-24-2013, 05:56 PM	#7
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: Four Core & Three Core Rad. Mounts F/S what are nut plates? __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

08-24-2013, 07:30 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S Probably not the " correct " term for them but it's what I call them. The small tin plates with a mounting hole that fits the shroud end of the radiator support upper bracket. The shroud bolt/screw fits into it when mounting the radiator/shroud together. Two required, one for each upper rad support. Common to both sizes of rad mounts. Most likely could be had at a parts house or hardware store Any body know what the real "true" name for them is, LOL ? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-26-2013, 07:34 AM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S a still have these bump __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

09-02-2013, 11:32 AM	#10
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S ttt one last time __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

09-02-2013, 12:19 PM	#11
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: Four Core & Three Core Rad. Mounts F/S I take the 4 cores for $20 shipped. PM me. Thanks Jim

09-02-2013, 01:19 PM	#12
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S FOUR CORE mounts SOLD TO JimH2828 PM sent with payment info. The 2 & 3 core rad. mounts still available. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

09-06-2013, 06:40 PM	#13
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: Four Core & Three Core Rad. Mounts F/S Payment received and 4 core upper mounts shipped. Thanks, JimH2828 2 & 3 core upper mounts with rubber cushions still available. Blasted, primed and painted $25 to your door. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.