Chevy 3100 -49 pop doors problem

[Dundee]

Is installed in the car to pop doors, and they only work with the remote control (also from inside).Make and model there is no information because the car has not yet come to me.Would anyone have experience of how I could get them to work inside the "mechanical" and the exterior of some secret switch?Where to get any parts ordered from them?

[_Ogre]

any push button switch will work for door door solenoids if you have a relay wired to open the doors.
you should have a relay for the remote to work thru.
i use a door window switch sideways in my console, left push opens the left door, right push...
i also have door safety cables made out of bicycle brake cable and sheath.
i have one cable inside in case of total battery failure and one cable run under the dash in case i lock the keys inside.
which i do a couple times per year. look at my build thread, most everything is detailed in there.
if you have a question about how i did something, post in my thread

[mr48chev]

I'd believe what you need to do is get a push button for each door as Ogre suggested and wire it to the relay for it's door so that you can trigger the relay from inside.

That will take figuring out which pin on the relay you need to hook the wire from the push button to and that will be the one that triggers it from the receiver for the poppers. You can find that in the wiring diagram that came with the kit.

[Dundee]

Found from anyone "switching" pictures,because I do not think that the car comes with them will...?