|
|
|
|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-27-2013, 05:38 PM
|
#1 |
|
Registered User
Join Date: Jul 2013
Location: Russellville, KY
Posts: 192
|
Fuel sending unit okay, gauge not working?
I thought my sending unit was bad since my fuel gauge never moves. I pulled it and checked it with an ohm meter and it seams to be okay. What else could it be? The gauge itself? It worked when I got the truck, just stopped one day at 1/8 of a tank
Thanks
__________________
married to TARA, that makes me the TARA-fied1 |
|
|
|
09-27-2013, 08:08 PM
|
#2 |
|
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
Re: Fuel sending unit okay, gauge not working?
Did you check the fuse for the dash gauge?
Jim
__________________
1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC |
|
|
|
|
09-27-2013, 08:27 PM
|
#3 |
|
Registered User
Join Date: May 2007
Location: Southern, Saskatchewan
Posts: 640
|
Re: Fuel sending unit okay, gauge not working?
Make sure wire for fuel gauge is still connected to fuse block
Posted via Mobile Device
__________________
Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride |
|
|
|
|
09-27-2013, 10:07 PM
|
#4 |
|
Registered User
Join Date: Jul 2013
Location: Russellville, KY
Posts: 192
|
Re: Fuel sending unit okay, gauge not working?
I did check the wire and the fuse. I drove the truck to day and noticed the temp gauge wasn't working either. I had only visually checked the fuse and it looked okay, but it turns out it was bad. I changed it and the gauges started working again. Leave it to me to make something more complicated than it has to be!
THANKS!!!
__________________
married to TARA, that makes me the TARA-fied1 |
|
|
|
|
09-28-2013, 09:48 AM
|
#5 |
|
Registered User
Join Date: Mar 2013
Location: Oakland, Ca.
Posts: 135
|
Re: Fuel sending unit okay, gauge not working?
The problem I've found more often than anything else is the ground. People test the sending unit at the sending unit, but the ground would still be bad. I would say out of a several dozen people that brought in cars/trucks with a "bad fuel gauge", only 2 or 3 were actually the gauge. Try testing the resistance between the unit and a ground point.
__________________
I stopped adding up how much I spend on my builds, it only makes me doubt my sanity knowing I've spent more than 9 times it's original value new.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
