10-24-2013, 01:25 PM | #1 |
Account Suspended
Join Date: Jan 2009
Location: Kuna, Idaho
Posts: 1,046
|
Carb Help Please
I have a Carter AFB Competition Series 4 brrl carb. I know where most of my hoses and the fuel line connects too on the carb, but I don't know what the other ends for? I have them circled in the picture.
|
10-24-2013, 01:32 PM | #2 |
Registered User
Join Date: Jul 2009
Location: Albuquerque, NM
Posts: 101
|
Re: Carb Help Please
Looks like ported vacuum ports to me. You would have to just see what vacuum ports/lines you had on your previous carb and then just use as needed on the new carb. if not needed, you can get rubber end plugs to plug them off.
|
10-24-2013, 01:41 PM | #3 |
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,731
|
Re: Carb Help Please
Big one on the left is a vent for a line to your charcoal filter.
Middle is ported vac. Right is manifold vac. |
10-24-2013, 03:11 PM | #4 | |
Account Suspended
Join Date: Jan 2009
Location: Kuna, Idaho
Posts: 1,046
|
Re: Carb Help Please
Quote:
From the way I have my other carbs set up is the brake booster hose goes to the back of the carb or to the intake itself. The breather cap hose on the valve cover goes to the big middle one on the front of the carb. Fuel line goes on the side. And then the distributer hose goes to the little one on the left front of the carb. I have edelbrocks on my other trucks. Never had a carb that has two ports on the side. I know the back one on the side is for the fuel line. |
|
10-24-2013, 03:19 PM | #5 |
Account Suspended
Join Date: Jan 2009
Location: Kuna, Idaho
Posts: 1,046
|
Re: Carb Help Please
Never had a motor for this project. I got the motor, tranny, intake, carb, and other misc parts in on the deal. The guy I got the carb from ran it on a dirt circle track car. Also, is there a way I can figure out the CFM rating?
|
10-24-2013, 03:30 PM | #6 |
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,731
|
Re: Carb Help Please
It's your pic and your circles!!
The big one in front goes to the pcv. Carb number on the lower left side flange tell's you what carb it is. Look here to find out the cfm. http://www.hemmings.com/partslocator/carburetors.html |
10-24-2013, 03:59 PM | #7 |
Account Suspended
Join Date: Jan 2009
Location: Kuna, Idaho
Posts: 1,046
|
Re: Carb Help Please
Since I don't have a charcoal filter, than I can plug off the one on the side and I'd just be left with the fuel line on the side?
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|