|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-31-2013, 11:52 PM
|
#1 |
|
Registered User
Join Date: Nov 2012
Location: DFW, TX
Posts: 298
|
reuse pitman and spindle nuts?
Hey guys
I wanted to know if its ok to reuse the castle nuts on the spindle (ill use new cotter pins obviously) and also if its ok to reuse the nut and lock washer on the pitman arm? thanks! |
|
|
|
11-01-2013, 06:22 AM
|
#2 |
|
Senior Member
 
Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: reuse pitman and spindle nuts?
I dont see why not, as long as the threads are in good shape, but I have to ask did the new parts come with new ones???
Assuming you installed new parts??
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks 
|
|
|
|
|
11-01-2013, 09:48 AM
|
#3 |
|
Registered User
Join Date: Nov 2012
Location: DFW, TX
Posts: 298
|
Re: reuse pitman and spindle nuts?
nah, the moog pitman arm didnt come with a new nut/washer and im reusing stock spindles...
thanks Mike! |
|
|
|
|
11-01-2013, 11:19 PM
|
#4 |
|
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: reuse pitman and spindle nuts?
Only nuts you don't reuse are the steel compression lock nuts and Nyloc brand lock nuts.
Castle nuts are fine as long as threads are good and no damage to the castle portion.
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
|
|
|
|
11-02-2013, 02:05 PM
|
#5 |
|
Senior Member
Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,500
|
Re: reuse pitman and spindle nuts?
I hope its ok as i have been doing it for years!
 it is as a nut is not a wear item.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
