The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-19-2002, 09:55 PM   #1
Retlaw
Registered User
 
Join Date: Sep 2001
Location: Anaheim, CA. USA
Posts: 24
Post Anyone done this?

I will be adding power locks & windows to my 69 Burb. Has anyone found a good way to get the wires into the door? Maybe post some pictures?? Is there any large rubber boots available to route them through.??

------------------
Retlaw
69 Sub
__________________
Retlaw
69 Sub
Retlaw is offline   Reply With Quote
Old 03-19-2002, 10:22 PM   #2
PanelDeland
I am a Referee of life.
 
PanelDeland's Avatar
 
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,992
Post

Street rodders sometimes use a pair of matching plates,one on the door and one on the jamb.They have contacts that mate when the door is closed.This would be OK for the locks as you would want the door closed but it would prevent you from operating the windows unless you closed the door.
You can find them in most Street Rod mags.
Otherwise I would just scour the wrecking yards for boots that would work.

------------------
Deland does Chevys 68Chevy panel(LIZ)
"A man and his truck,it's a beautiful thing"
"I have the body of a god,unfortunately it's Budda"

__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion.
You can't fix stupid,not even with duct tape.
"My appearance is due to the fact that "GOD" does punish you for having too much fun!"
Barrett-Jackson has perfected alchemy,they make rust into gold!
"You can lead a horse to water but you can't saddle a duck"
"Cleverly disguised as a 'Responsible Adult'
"Sometimes your Knight in shining armor is just a retard in tinfoil"
PanelDeland is offline   Reply With Quote
Old 03-20-2002, 01:25 AM   #3
neonlarry
Registered User
 
neonlarry's Avatar
 
Join Date: Feb 2002
Location: Vacaville, CA
Posts: 2,745
Post

There are some conduit pieces listed in the LMC catalog that are made for that.
__________________
70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights
99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs
95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI
neonlarry is offline   Reply With Quote
Old 03-20-2002, 02:24 AM   #4
67 cst swb
Senior Member
 
67 cst swb's Avatar
 
Join Date: Nov 2001
Location: Rapid City, SD
Posts: 2,281
Post

those are a Painless Wireing product...
__________________
My Trucks:
1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project
1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver
1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck
1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck
2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White
67 cst swb is offline   Reply With Quote
Old 03-20-2002, 12:55 PM   #5
BobbyK
Registered User
 
BobbyK's Avatar
 
Join Date: May 2000
Location: Petrolia,Ontario,Canada but working in Port Huron,Mi.
Posts: 1,772
Post

Hope this works.These are cool.They go in the door jam.




------------------
"71"blazer,rust free(bought in Arizona),350SBC
(375HP),700R4,factory G.M. TPI.Living in Santa Barbara,California.Ongoing project.


__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension.
Petrolia,Ontario,Canada but working in Port Huron,MI.
See ALL my Blazer pic's HERE
BobbyK is offline   Reply With Quote
Old 03-20-2002, 08:21 PM   #6
Mike C
Registered User
 
Mike C's Avatar
 
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,727
Post

The Camaro restoration places have a really trick set of reproduction boots for factory power window harnesses. They just cost out the ying yang (About $75 if I remember)but is probably the way I will go when I do my 'vert, I already have the window regulators and switches.

------------------
70 GMC 3/4 ton Sierra Grande 402/TH400
72 Jimmy 4WD 4spd 4" & 35's
64 Corvette Coupe
68 Camaro 'vert TPI & TH700
69 Z/28 355 12.6's @110
72 Datsun 240Z-ol' reliable


__________________
44 Willys MB
52 M38A1
64 Corvette Coupe
68 Camaro 'vert LT1 & TH700
69 Z/28 355 12.6's @110
69 Chevy Short Step 4 1/2"/7" drop
72 Jimmy 4WD 4spd 4" & 35's
02 GMC 2500HD 4x4 Duramax
Mike C is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:41 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com